GE Products BuyLog Smart Catalog

Busway

Section 13

Lighting Busway Type LTG Plug-in Application

Type LTG Plug-in Busway Type LTG plug-in busway is a unique four-wire system designed for convenient distribution of power for lighting or similar light- duty loads.

Feed-in Boxes Type Figure No. 1

Std. Pkg. Product Number

Feed-In Boxes 4 1 Surface Mounting End Feed-In Boxes 4 1 Surface Mounting Center Feed-In Boxes 5 1 Suspended Mounting Center Feed-In Boxes 5 1 Suspended Mounting Sectionalizing Feed-In Boxes 6 1 Underslung Mounting Center Feed-In Boxes 6 1

DFEB422

DFCB422

Available Ratings Amperes: 50 amperes Voltage: 300 Volts or less, AC or DC Busing: Copper Service Type: Three-phase, four-wire Enclosures: Indoor only

DAOCBB422

DAOCSC422 2

DASCBB422

OBSOLETE

DASCSB422 2

Application Type LTG busway is designed for use on three-phase, four-wire systems that are rated 300 Volts or less. It is available in five- and ten-foot lengths only. Ordering Type LTG is ordered by product number. Two hangers should be included for each ten feet of busway, and these must be priced separately. Coupling sets are required to connect busway sections, feed-in boxes, or elbows, and these must be ordered separately.

Underslung Mounting Sectionalizing 1 See page 13-80. 2 Not UL listed.

Fittings Type Figure No. 1

Std. Pkg. Product Number

Elbows Edgewise, 9 1 Internal Elbows Edgewise, 10 1 External Elbows Flat, Internal 8 1 Elbows Flat, External 7 1

DAIEB422

DAEEB422

OBSOLETE

DAIFEB422 DAOFEB422

Hardware Type Figure No. 1

Linear Lengths and Coupling Type Figure No. 1

Std. Pkg. Product Number

Std. Pkg. Product Number

OBSOLETE

Hanger Plate (Only 11 1 with Screws for Surface-Mounting LTG) End Cap with Screws 14 1 Hanger Plate with 13 1 Messenger Cable Hook Combination Rod and 12 1 Messenger Cable Hanger Fixture Hook 15 1 Order two hangers for each 10 feet of busway. 1 See page 13-80. OBSOLETE

DLTGF

10 feet 1 1 5 feet 1 1 Coupling Set (1 1 Plate with 4 Connectors) Coupling Plate (only) 2 1 Bus Connector (only) 3 1

DLTGB422 DLTGB4225 DLTGBCP4

DLTGEC

DLTGMF1

DLTGCP

DLTGBC Order one coupling set for each busway length, feed-in box, and elbow. 1 See page 13-80.

DLTGMF3

DLTGFH

Unfused Plugs Terminal (only)

Bus Bar Product Service Type Amperage Voltage Contact Std. Pkg. Number 4-pole 20 240 AC A-B 1 DATRP421 3 3 Includes cable clamp and ground terminal. OBSOLETE

Rev. 1/19 Data subject to change without notice

GE Products BuyLog

go.abb/industrial

13-78