GE Products BuyLog Smart Catalog

Modular Metering Meter Mod III Meter Stack Modules—Commercial Overview

Section 2

Indoor/Outdoor Construction Raintight caps, meter covers and

lockable raintight tenant breaker covers make it convenient for you to use any of our meter modules for N1 or N3R applications. Tenant Breaker Range All modules accept 15-225A bolt-on breakers up to 100K interrupting rating. The breakers are UL listed for series rating with the breakers in GE load centers and panels. Barrier A solid metal barrier separates the meter socket section from tenant breaker in wireway section. The unmetered vertical bus is enclosed to guard against power theft. Neutral Assembly Located in the wireway of each module, the assembly permits convenient termination of the neutral conductors. Mains and Modules Connect together quickly and smoothly with front-accessible bolts securing them without removing socket interiors or bus access plates. Main bus joint bolts torque to 25 ft. lbs. Enclosed Horizontal Bus Non-removable metal barrier encloses 1200A horizontal bus when passing through tenant breaker section which adds security. Ground Bars The factory-installed equipment ground bars are provided in both top and bottom gutters. End Walls Top cap is removable and does not contain knockouts so contractors can position and punch holes where needed. Numerous KO’s in the back and bottom are included for flexibility.

Meter Socket The 5-Jaw and 7-jaw meter sockets include a built- in lever bypass and jaw release. The ground wire is factory connected.

Rev. 1/19 Data subject to change without notice

GE Products BuyLog

go.abb/industrial

2-30