GE Products BuyLog Smart Catalog

Uninterruptible Power Supplies Energy Connections SG Series

Section 20

10-150 kVA Three-Phase 225-300 kVA Three-Phase

Available Options —Additional battery systems for extended back up times —Input 5th harmonic filter reduces the input distortion (input THD) to less than 7%; this option is integral to the UPS, no additional cabinet required —Additional input/output isolation and voltage adaptation transformers available for all kVA sizes and voltages —External (full wrap-around) maintenance bypass; available in two or three breaker, panel mounted configurations; Kirk Key protection also available —Remote status panel: Allows the UPS to be remotely monitored with an UPS panel incorporating indicator lights and alarms —RPA kit: Any single UPS can be easily field-configured for Redundant Parallel Architecture —SNMP card: This optional plug-in card allows the UPS to be managed using an existing network management system or with GE’s exclusive UPS management software —UPS monitoring and management software (10-750 kVA models) —FCC filter for applications where FCC Class A, Part 15 compliance is required —Three-wire input conversion kit

Features and Benefits —Extremely low output voltage distortion for even non-linear and 100% step loads reducing the need for over sizing the UPS —Redundant Parallel Architecture (RPA) increases system reliability by eliminating single points of failure without increasing overall system complexity —Utilizes SVM (Space Vector Modulation), an advanced PWM (Pulse Width Modulation) digital control technique, to modulate the inverter resulting in fast transient response with high efficiency —Fully compliant with international standards on Voltage Frequency Independent (IEC 62040-3) operation providing full power protection for demanding critical applications —Standard inverter output isolation transformer that isolates utility power from the load, thus providing additional critical power protection —Superior Battery Management (SBM) enhances battery lifetime resulting in reduced cost of operation —Intelligent Energy Management (IEM) automatically determines the most efficient mode of operation for the RPA system thus reducing overall operating costs —Designed for serviceability with front service access reducing maintenance and repair costs —Integrated internal manual maintenance bypass reducing the need for external equipment —Automatic start-up procedure and a user-friendly interface simplifying UPS operation —Designed with GE’s Six Sigma methodology ensuring high product quality —Casters and leveling feet easing installation procedure (10-150 kVA only) —Every GE UPS can be monitored and managed via LAN, serial/modem connection or through the Internet

Rev. 1/19 Data subject to change without notice

GE Products BuyLog

go.abb/industrial

20-34