Jantz Catalog 52

GTC BEARING SYSTEM PIVOT PINS

Pivot Pins

Path Makers

Precision ground and hardened 416 Stainless steel (tolerance +/- .0002) for smooth action on folders. Will work with the GTC Bearings and on folders without ball bearings. 5/32" threaded 4-48, 3/16" and 1/4" threaded 6-48. Pivot pin includes 2 plain Torx head screws.

Bearing System Developed and Patented by Gustavo T Cecchini

A bearing will be included with each Path Maker.

CAT.# O.D. LENGTH HEAD TORX PRICE F80 5/32" .350" 7/32" T6 6.95 F82 5/32" .500" 7/32" T6 6.95 F85 3/16" .350" 1/4" T7 6.95 F88 3/16" .500" 1/4" T7 6.95 F96 1/4" .350" 5/16" T8 6 .95 F98 1/4" .500" 5/16" T8 6.95

SIZE 1 - SMALL BEARING

SIZE 2 - MEDIUM BEARING CAT.# SIZE PIVOT BEARING PRICE RA755 23/64" 5/32" GC101 19.95 RA757 23/64" 3/16" GC106 19.95 CAT.# SIZE PIVOT BEARING PRICE RA763 25/64" 3/16" GC111 19.95 RA765 25/64" 5/32" GC111 19.95

Threaded Pivot Only

SIZE 3 - LARGE BEARING

CAT.# SIZE PIVOT BEARING PRICE RA774 27/64" 1/4" GC121 19.95

CAT.# O.D. LENGTH FITS PRICE F85B 3/16" .350" 1/4" 1.95 F88B 3/16" .500" 1/4" 1.95 F96B 1/4" .350" 5/16" 1.95 F98B 1/4" .500" 5/16" 1.95 Pivot barrels are threaded 6-48. Decorative Torx Screws for Pivot Pins Add a custom touch to your folding knife with our beautifully embellished Torx head screws. Designed and manufactured by Jantz in Davis Oklahoma from 303 stainless steel. For use with our threaded pivot barrels. 1/4 " Diameter Torx Head

GTC 440C stainless steel thrust ball bearings caged in stainless steel retainers developed and patented by Gustavo T. Cecchini's GTC Knives to reduce friction and failures, increase opening time, and easier cleaning. The 100% stainless steel construction eliminates the problems of other thrust bearings that are not 100% stainless. Install by cutting a pocket, with a counterbore, in both the blade and frame. Use one bearing in blade and one in the frame. Some prefer to cut the pocket in both frames, and not in the blade. This is a good solution when the blade is already hardened. Sold Each. BALL SIZE PRICE GC101 .354" .157" .062" Small - 1 1.29 GC106 .358" .192" .062" Small - 1 1.29 GC111 .378" .218" .062" Med. - 2 1.29 GC121 .415" .255" .062" Large - 3 1.29 GC102 .454" .258" .078" Heavy - 4 1.29 Counterbores Made in the USA. CAT.# O.D. I.D.

SIZE 4 - HEAVY DUTY BEARING

CAT.# SIZE PIVOT BEARING PRICE RA784 15/32" 1/4" GC102 19.95

Path Maker

The Path Maker is used to provide a smooth raceway for the thrust bearing balls to slide along. The Path Maker is used in a drill press to mark the raceway into the blade and liners. This task is performed by setting your drill press at 500 RPM and applying a light down pressure for a few seconds. Check the surface for marking until a circular raceway is visible, then this task is complete. We recommend that you complete this task to the blade before and after heat treat to guarantee the elimination of all tooling marks. You will need a different Path Maker for each bearing size and each pivot size that you use. The final assembly should use new bearings only.

Spinner Galaxy Orchid Turbine 1/4" torx head diameter threaded 6-48. Length .240" overall or .180" under head. Use T6 torx wrench.

CAT. # FF401 FF402 FF403 FF404

NAME MATERIAL PRICE

2.49 2.49 2.49 2.49

Spinner Galaxy

Stainless Stainless

Orchid Stainless Turbine Stainless

Select the counterbore to fit the bearing and pivot pin combination listed below, also listed are the proper depths to cut the pocket. SIZE 1 - SMALL BEARING (GC101, GC106) CAT.# SIZE PIVOT DEPTH PRICE RA855 23/64" 5/32" .050" 49.95 RA857 23/64" 3/16" .050" 49.95

5/16 " Diameter Torx Head

Solar Flare Flower

Sunburst

Gear

SIZE 2 - MEDIUM BEARING (GC111)

The illustration (above left) shows the pocket in the left liner once the procedure has been completed. The first bearing will fit in this pocket. The second pocket should be cut in the blade. In final assembly (see above right), the liner pocket and blade pocket should be facing up when the knife is in the proper position for assembly.

CAT.# SIZE PIVOT DEPTH PRICE RA863 25/64" 3/16" .050" 49.95 RA865 25/64" 5/32" .050" 49.95

Orion

Bullseye Cosmos Texas Star

SIZE 3 - LARGE BEARING (GC121)

CAT.# SIZE PIVOT DEPTH PRICE RA874 27/64" 1/4" .050" 59.95

Six Shooter Jupiter Windmill Constellation 5/16" torx head diameter threaded 6-48. Length .240" overall or .180" under head. Use T8 torx wrench.

SIZE 4 - HEAVY DUTY BEARING (GC102) CAT.# SIZE PIVOT DEPTH PRICE RA884 15/32" 1/4" .066" 59.95

There should be a raceway path on each side of a thrust bearing. The illustration above shows the right liner with the raceway path completed. This raceway matches up to the blade pocket

CAT. # FF271 FF272 FF273 FF274 FF275 FF276 FF277 FF278 FF279 FF280 FF281 FF282

NAME QUANTITY PRICE

2.49 2.49 2.49 2.49 2.49 2.49 2.49 2.49 2.49 2.49 2.49 2.49

Solar Flare Stainless

Reamers

Flower

Stainless Stainless Stainless

Gear

Sunburst

Bulls Eye Stainless Cosmos Stainless

thrust bearing. This procedure should be completed on both sides of the blade. This will match up with the raceway needed in the liner pocket thrust bearing. When finished you will have made a raceway path on all four bearing surfaces and you should be ready for assembly.

Reamers are .0005" oversize. Ream blade and liners for pivot pins. CAT.# SIZE PIVOT SIZE PIVOT PIN PRICE RA1570 .1570" 5/32" F80 & F82 11.95 RA1880 .1880" 3/16" F85 & F88 13.95 RA2505 .2505" 1/4" F96 & F98 15.95

Texas Star

Stainless Stainless Stainless Stainless

Orion

Six Shooter Stainless

Jupiter

Windmill

Constellation Stainless

PAGE 51

PRICES SUBJECT TO CHANGEWITHOUT NOTICE

Made with