Jantz Catalog 52

MEASURING

JANTZ SUPPLY ★ 1-800-351-8900 ★ WWW.KNIFEMAKING.COM

Dial Caliper

Drive Pin Punches

Outside Micrometers

The only dial caliper made in the USA. Full six inch range, four-way stainless steel dial caliper with knife edge contacts for inside and outside measurements. Readings taken directly from the bar and dial indicator. Measurements with one hand, thumb roll for fine adjustment. Knurled thumb screws lock the moveable jaw and adjustable indicator dial at any setting. English model dial indicator graduated .001" with .100 range per revolution. Case included. CAT.# SIZE BAR GRAD. PRICE ST120Z6 6" .100" 181.09 Spring Tempered Steel Rule

Set of Eight in round box. Hardened, highly polished with a knurled finger grip. Made in the USA. CAT.# DIA. PUNCH DIA. BODY PRICE ST565A 1/16" 19/64" 5.00 ST565B 3/32" 19/64" 5.00 ST565C 1/8" 19/64" 5.00 ST565D 5/32" 19/64" 5.00 ST565E 3/16" 5/16" 5.00 ST565F 7/32" 25/64" 5.00 ST565G 1/4" 25/64" 5.00 ST565H 5/16" 29/64" 5.00 STS565WB (1 of each size) in Box 51.00 STS565PC (1 of each size) in Pouch 45.00

Satin chrome finish on sleeve and thimble. Quick-reading figures on thimble with every thousandth numbered; convenient decimal equivalents, too. Micro-lapped finish on carbide anvil and spindle faces. Smooth friction thimble for uniform pressure. Accurate measuring and repeatability. Extremely hard and stable one piece spindle. Made in the USA. CAT.# RANGE GRADUATION PRICE STT436FL1 0-1" .0001" 123.00 STT436FL2 1"-2" .0001" 145.00

Center Punches

Combination Squares

Satin chrome finish rules. 6" rule is approx. 3/4" wide and 3/64" thick. Made in the USA. CAT.# DESCRIPTION PRICE STC604R6 6" Rule 21.56

Points are ground to proper angle for maximum service. Made in the USA. DIA. AT TOP DIA. CAT.# OF TAPERED POINT OF BODY PRICE ST117A 5/64" 9/32" 5.75 ST117B 3/32" 19/64" 5.75 ST117C 9/64" 5/16" 5.75 ST117D 5/32" 3/8" 5.75

Edge Finder

Prick Punch

Spirit level in square and protractor head, direct reading double 180 degree protractor scale, tempered satin chrome 12" blade. Protractor turret with cast heads and black wrinkle finish. Made in the USA. CAT.# DESCRIPTION PRICE STC9124R 12" Square with 3 Heads 216.00

Used in milling machines and drill press to locate the edge and centers of work pieces. Has a .500" body and contact body with center to find edges and locate center lines and scribed lines on one end with a .200" contact body on the opposite end to find edges. Made in the USA BODY CONTACT CAT.# DIAMETER DIAMETER PRICE ST827B .500" .200/point 27.00

Points are carefully ground to correct taper to give sharp impressions. Made in the USA. DIA. AT TOP DIA. CAT.# OF TAPERED POINT OF BODY PRICE ST816B 3/32" 19/64" 7.50 Automatic Center Punch

Cross Test Level

Center Gages

These punches automatically strike a blow when downward pressure is applied. The force of the blow is regulated by the adjustable knurled cap. The point can be easily removed for replacement. All sizes are identical in style and differ only in the striking power. Made in the USA. CAT.# LENGTH DIAMETER PRICE ST18AA 3 53/84" 7/16" 32.00 ST18A 4 13/18" 9/16" 36.00 ST2947 Point Only for 18AA, 18A 4.95

Has two vials at right angles for cross test leveling and a plumb level at the top for checking squareness. Made in the USA. CAT.# SIZE DESCRIPTION PRICE ST134 2" x 3" x 1/2" Level 45.00

Shown with Optional Attachment Am. Nat. — U.S. 60° Std. has scale graduated in 14ths, 20ths, 24ths and 32nds for finding number of threads per inch. Table of double depths of threads for determining size of tap drills. All gaging surfaces ground. Made in the USA. CAT.# DESCRIPTION PRICE STC391 Center Gage Only 21.56 ST392 392 Attachment 14.00

Dial Test Indicator Set

Bench Block

Screw Pitch Gages

Sensitive, reliable and easy-to-read. With its three hardened contact points, the Universal Dial Test Indicator adjusts to any angle. Graduated in .001 dial reads 0-100 with a range of .200. Set comes with points C, D, and E. Plus four attachments (a) clamp with 5/16" rod, (b) tool post holder with 5/16" rod, (c) snug complete for attaching (a) or (b) to dial test indicator, and (e) hole attachment. All in a fitted case. Made in the USA. CAT.# DESCRIPTION PRICE ST196A1Z Indicator in Case w/points 218.00

Block is made from a steel forging and is hardened and ground. Smooth finish on the face preserves finish of work being held. Base is recessed to make it light and yet strong. Approximately 1 1/2" high and 3" diameter. Holes vary in sizes from 1/8" to 5/8". Made in the USA. CAT.# DESCRIPTION PRICE ST129 Bench Block 89.00

ST472 has 51 pitch ranges for gaging American National and U.S. Standard 60°. ST156M has 28 pitch ranges for gaging metric threads. Each leaf stamped with number of threads per inch. Made in the USA. NUMBER RANGE CAT.# OF LEAVES OF THREADS PRICE ST472 51 4 to 84 threads/in. 70.00 ST156M 28 .28 to 2.50 mm 39.00

PAGE 85

PRICES SUBJECT TO CHANGEWITHOUT NOTICE

Made with