RBL Catalog

JSPEC 2.5” & 3.5” WRANGLER JK SUSPENSION SYSTEM FEATURES • Front and rear dual rate coils springs • Fox 2.0 Evolution Series front and rear shocks • JKS MFG front adjustable trackbar • JKS MFG front sway bar quicker disconnects • Front and rear brake line relocation • Rear track bar bracket

JSPEC 3.5” WRANGLER JK J KONTROL SUSPENSION SYSTEM

• Front and rear bump stop extensions SUSPENSION 2DR/4DR PART# 2.5” Lift 2DR/LHD

PN 103K 1,2,4,5 PN 102K 1,2,4,5 PN 101K 1,3,4,5 PN 100K 1,3,4,5 PN 107K 1,2,4,5 PN 106K 1,2,4,5 PN 105K 1,3,4,5 PN 104K 1,3,4,5

NOTES 1 Rear Trackbar Brace [JKS PN: OGS169] is strongly recommended to reinforce weak factory mount on axle. 2 Max. Recommended Tire Size 33x12.50 on 16x8 wheels with 4.5” backspacing 3 Max. Recommended Tire Size 35x12.50 on 16x8 wheels with 4.5” backspacing 4 Install Time: 5-6 hours 5 Rubicon Sway Bar Link hardware included.

2.5” Lift

4DR/LHD 2DR/LHD 4DR/LHD 2DR/RHD 4DR/RHD 2DR/RHD 4DR/RHD

• Dual Rate Coil Springs • Fox 2.0 Evolution Series Shocks • JKS Front Adjustable Track Bar

Suspension 3.5” Lift

SUSPENSION 2DR/4DR PART# 3.5” Lift 2DR

3.5” Lift 2.5” Lift 2.5” Lift 3.5” Lift 3.5” Lift

PN 109K 1,2,3,4 PN 108K 1,2,3,4

• JKS Front Sway Bar Quicker Disconnects • Front and Rear Brake Line Relocation • Rear Track Bar Relocation Bracket • Front and Rear Bump Stop Extensions • Front Control Arm Relocation Brackets • Front Track Bar Relocation Bracket • Flipped Drag Link

3.5” Lift

4DR

NOTES 1 Rear Trackbar Brace [JKS PN: OGS169] is strongly rec- ommended to reinforce weak factory mount on axle. 2 Max. Recommended Tire Size 35x12.50 on 16x8 wheels with 4.5” backspacing 3 Install Time: 5-6 hours. 4 Rubicon Sway Bar Link hardware included.

JSPEC WRANGLER JK ADVANCED GEOMETRY UPGRADE KIT • Reduced control arm angles • Corrects caster for 2”-4.5” of lift

WRANGLER JK DRAG LINK FLIP KIT

• Improves the front drive shaft CV joint operating angles through full wheel travel • Brackets are made from heavy-duty 7GA steel and are fully boxed and welded for superior strength

2DR/4DR - PN 1210

• Increase ground clearance. • Provide better performing, solid steering feel. • Flattens out steering angle when combined with 2” lift or more. • 7/8” Step Drill Bit Included

2DR/4DR - PN 2450

NOTES 1 For use on LHD JK models with at least 2” of suspension lift 2 Requires 3” of front bump stop extension – JKS1130 available separately 3 Should not be combined with other track bar relocation system 4 Can be used with factory replacement adjustable track bars 5 To be used with factory pitman arm for proper geometry

PN 110K

JSPEC WRANGLER TJ 2” SUSPENSION SYSTEM FEATURES • Front and rear dual rate coils springs • Jspec custom valved gas shocks • JKS MFG front adjustable trackbar • JKS MFG front sway bar quicker disconnects • Front brake line relocation • Rear track bar bracket • Front bump stop extensions

WRANGLER JK EXHAUST EXTENSION KIT • CNC precision machined DOM steel tube spacers. • Provides clearance between front drive shaft and cross over tube. • Factory exhaust flare joints NOTES 1 Required on 2012-2016 JK with 2-5’’ of lift PN JKS8150

NOTES 1 System fits all models 1997-2006, including Rubicon and Unlimited 2 Max. Recommended Tire/Wheel Sizes 32x11.50 on 15x8 wheels with 4.5” backspacing or 32x10.50 on stock wheels

VEHICLE PROTECTION JSPEC™ Suspensions are backed by the JKS Lifetime Limited Warranty and your Jeep ® is Covered by the Factory Protection Plus Program. There is no need to wait for the factory warranty to expire before making your Jeep ® an off-road beast. To learn more about the Factory Protection Plus Program, visit 560plus.com

ATTENTION: THIS IS A QUICK REFERENCE GUIDE. PLEASE CONTACT YOUR SALES REP FOR ORDERING. MANY ACCESSORIES NOT LISTED... CONTACT YOUR SALES REP FOR COMPLETE INFORMATION OR VISIT JKSMFG.COM

50

Order Desk 1.800.272.9671

Website RBLWAREHOUSE.COM