2018-Flex-Owner's-Manual

Maintenance

3. Measure the height from the center of the headlamp to the ground. Note: There may be an identifying mark on the lens to help you locate the center of the headlamp bulb. 4. Mark a horizontal reference line on the vertical wall or screen that is a minimum of 8 ft (2.4 m) long. 5. Switch the low beam headlamps on and open the hood.

7. To adjust the vertical aim, use a suitable tool to rotate the adjuster clockwise or counterclockwise. Note: To see a clearer light pattern while adjusting one headlamp, block the light from the other headlamp. 8. Close the hood and switch the low beam headlamps off. Horizontal AimAdjustment Horizontal aim is not adjustable on your vehicle. REMOVING AHEADLAMP To gain access to the headlamp securing bolts and to remove the headlamp assembly, you must first remove the front fascia and front bumper assemblies. We recommend you see an authorized dealer.

E142465 6. There is a distinct change from light to dark in the right-hand portion of the headlamp beam pattern. Position the top edge of this cut-off at the horizontal reference line.

E220458

CHANGING A BULB WARNINGS

Switch the lamps and the ignition off. Failure to do so could result in serious personal injury. Bulbs become hot when in use. Let them cool down before you remove them.

E220457

259

Flex(TP3) ,enUSA,Editiondate:201704,FirstPrinting