Henry Schein Dental. ACE CATALOGO INFINITY INTERNAL HEX 2019
i n f i n i t y INTERNAL HEX imp l an t s y s t em
20
INTERNAL HEX 3.7mm Drilling Sequences *
INTERNAL HEX Surgical Drilling Protocols
Ø 3.0mm Round Drill Drill pilot hole
Ø 2.3mm Twist Drill Straight Drill to implant length
Ø 2.3/ 2.8mm Paralleling Pin Confirm drilling angle
Ø 2.8mm Twist Drill Straight Drill to implant length
Ø 3.4mm/ 2.8mm Twist Drill Step Drill to implant length
Ø 2.8mm Depth
Ø 3.7mm Bone Tap Match implant diameter
Delivery Driver Choose Ratchet or Contra Angle
Gauge Confirm drilling depth
800- 1200 RPM
800- 1200 RPM
800- 1200 RPM
800- 1200 RPM
20 RPM 45 Ncm
20 RPM 45 Ncm
SPEED
–
Soft Bone Only
Ø 3.7 mm SOFT BONE Ø 3.7 mm DENSE BONE
Dense Bone Only
Dense Bone Only
* Caution: Twist drills with drill point tips are approximately 1mm longer in length than what is indicated by the markings. SOFT BONE
REMOVING THE FIXTURE-MOUNT 1 Disengage the driver • After placing the implant, disengage the hand or contra angle implant driver tool from the implant and fixture mount by pulling off the tool in a straight upward direction. 2 Remove the fixture mount • Using the offset wrench to prevent the fixture-mount from turning, remove the retaining screw from the top of the fixture-mount using the 1.25mm hand driver . This will allow you to remove the fixture-mount from the implant. 3 Position the implant • With the fixture-mount removed, the implant can, if desired, be repositioned by inserting the 2.5mm ratchet or contra angle hex driver directly into the implant. • Once the implant has been positioned appropriately, a prosthetic attachment and retaining screw can be placed with the 1.25mm hex driver. 4 Optional If desired, the removed fixture-mount can serve as: • an open tray impression coping . • a temporary abutment .
1
2
Follow the marking on the Surgical Tray for placement in Soft Bone
DENSE BONE
Follow the marking on the Surgical Tray for placement in Dense Bone
Drill Laser Markings
3
4
16mm 13mm 11.5mm 10mm
8mm 6mm
Made with FlippingBook Learn more on our blog