Henry Schein Dental. ACE CATALOGO INFINITY INTERNAL HEX 2019

i n f i n i t y INTERNAL HEX imp l an t s y s t em

23

INTERNAL HEX 5.1mm Drilling Sequences *

INTERNAL HEX Surgical Drilling Protocols

Ø 3.0mm Round Drill Drill pilot hole

Ø 2.3mm Twist Drill Straight Drill to implant length

Ø 2.3/ 2.8mm Paralleling Pin Confirm drilling angle

Ø 3.4mm/ 2.8mm Twist Drill Step Drill to implant length

Ø 2.8mm Depth

Ø 3.8mm/ 3.4mm Twist Drill Step Drill to implant length

Ø 4.4mm Twist Drill Straight Drill to implant length

Ø 4.8 mm / 4.4 mm Twist Drill Step Drill to implant length

Ø 5.1mm Bone Tap Match implant diameter

Delivery Driver Choose Ratchet or Contra Angle

Gauge Confirm drilling depth

800- 1200 RPM

800- 1200 RPM

800- 1200 RPM

800- 1200 RPM

800- 1200 RPM

800- 1200 RPM

20 RPM 45 Ncm

20 RPM 45 Ncm

SPEED

–

–

Soft Bone Only

Ø 5.1 mm SOFT BONE Ø 5.1 mm DENSE BONE

Dense Bone Only

Dense Bone Only

* Caution: Twist drills with drill point tips are approximately 1mm longer in length than what is indicated by the markings.

SOFT BONE

REMOVING THE FIXTURE-MOUNT 1 Disengage the driver • After placing the implant, disengage the hand or contra angle implant driver tool from the implant and fixture mount by pulling off the tool in a straight upward direction. 2 Remove the fixture mount • Using the offset wrench to prevent the fixture-mount from turning, remove the retaining screw from the top of the fixture-mount using the 1.25mm hand driver . This will allow you to remove the fixture-mount from the implant. 3 Position the implant • With the fixture-mount removed, the implant can, if desired, be repositioned by inserting the 2.5mm ratchet or contra angle hex driver directly into the implant. • Once the implant has been positioned appropriately, a prosthetic attachment and retaining screw can be placed with the 1.25mm hex driver. 4 Optional If desired, the removed fixture-mount can serve as: • an open tray impression coping . • a temporary abutment .

1

2

Follow the marking on the Surgical Tray for placement in Soft Bone

DENSE BONE

Follow the marking on the Surgical Tray for placement in Dense Bone

Drill Laser Markings

3

4

16mm 13mm 11.5mm 10mm

8mm 6mm