004722_Superior Die Sets

The Superior “S-Spring” lets you invert your ball bearing die set so the pins are in the die shoe. The “S-Spring” holds the ball cage in position, ready to engage the bushing when not under preload. Once engaged, the spring does not affect the normal operation of the ball bearing engagement. “S-Springs” can be used with any pin or bushing type or any ball bearing style. “S” SPRING SYSTEM

TYPE A

MAXI-CAGE

PUNCH HOLDER

DIA. NOM.

LENGTH CAGE

*

Q

S

ABOVE DIE SHOE PIN LENGTH

ABOVE DIE SHOE PIN LENGTH

“S” SPRING LENGTH

DIE SHOE

SPRING FREE LENGTH

PART NUMBER

“Q” LENGTH

GUIDE PIN NOM DIA.

“S-SPRING” LENGTH FOR (TYPE A) DIE SET = — PIN LENGTH ABOVE D.S “S” SPRING LENGTH “Q” LENGTH

Round up to next stocked length. * See chart for proper Q length.

“S-SPRING” LENGTH FOR (MAXICAGE) DIE SET = — PIN LENGTH ABOVE D.S “S-SPRING” LENGTH ( — 1/2” CAGE LENGTH

Round up to next stocked length.

(

NOTE: Stackable for pin lengths longer than 3”

uncontrolled if printed or downloaded

1150