2018 Fusion Owner's Manual
SYNC™3
3D city models are complete 3D models of entire city areas including navigable roads, parks, rivers and rendered buildings. 3D landmarks and city models appear in 3D map mode only. Coverage of these varies and improves with updated map releases.
Re-center the map by pressing this iconwhenever you scroll the map away from your vehicle’s current location. Mute: Press to mute the audio navigation guidance. Press the button again to un-mute the guidance.
E207751
Select the zoom in icon to see a closer view of the map.
E251780
E207752
Select the zoom out icon to see a farther away view of the map.
E251779
Points of Interest (POI) grouping icon: You can choose up to three POI icons to display on the map. If the chosen POIs are located close together or are
E207753
You can adjust the view in preset increments. You can also pinch to zoom in or out of the map. The information bar tells you the names of streets, cities or landmarks as you hover over them with the crosshair curser. You can change your view of the map by tapping on the location indicator icon on the right hand side of the screen. You can choose from the following options:
E207754
at the same location a box is used to display a single category icon instead of repeating the same icon, in order to reduce clutter. When you select the box on the map, a pop-up appears indicating how many POIs are in this location. Select the pop up to see a list of the available POIs. You can scroll through and select POIs from this list. If your vehicle is low on charge or fuel, station icons automatically display on the map. If you have subscribed to SiriusXM Traffic and Travel Link (where available), traffic flowwill be indicated on the map by green (clear), yellow (slowing), and red (stopped) road highlights. Traffic flow is indicated where the information is available and varies across the US. You can choose to display traffic icons on the map representing twelve different types of incidents. See Settings (page 440). You can set a destination by hovering above a location and selecting:
Heading up (2Dmap) This always shows the direction of forward travel to be upward on the screen. This view is available formap scales up to 3mi (5 km). North up (2Dmap) always shows the northern direction to be upward on the screen. 3Dmapmode provides an elevatedperspective of themap. Adjust this viewing angle and rotate the map 180 degrees by touching the map twice, and
E207750
E207749
E207748
then dragging your finger along the shaded bar with arrows at the bottom of the map.
430
Fusion(CC7)Canada/UnitedStatesofAmerica,enUSA,FirstPrinting
Made with FlippingBook flipbook maker