2018-F150-Owner's Manual

Windows andMirrors

TelescopingMirrors (If Equipped)

The left-hand and right-hand mirrors move at different rates. For example, one mirror may stop while the other one continues to move. This is normal. Moving the mirrors 10 or more times within one minute, or repeated folding and unfolding of the mirrors while holding the control down during full travel, may disable the system to protect the motors from overheating. Wait approximately three minutes with the vehicle running, and up to 10 minutes with the vehicle off, for the system to reset and for function to return to normal. LooseMirror If your power-folding mirrors are manually folded, they may not work properly even after you re-position them. You need to reset them if: • The mirrors vibrate when you drive. • The mirrors feel loose. • Themirrors do not stay in the folded or unfolded position. • One of the mirrors is not in its normal driving position. To reset the power-fold feature, use the power-folding mirror control to fold and unfold the mirrors. You may hear a loud noise as you reset the power-folding mirrors. This sound is normal. Repeat this process as needed each time the mirrors are manually folded. PowerScope™PowerTelescoping Mirrors (If Equipped) This feature lets you position both mirrors at the same time.

E163061 This feature lets you extend the mirror about 3 in (75 mm). It is useful when towing a trailer. You can manually pull out or push in the mirrors to the desired position. Power-FoldingMirrors (If Equipped)

E176218 To fold both mirrors, switch your vehicle on (with the ignition in accessory mode or the engine running) and then: 1. Press the control. 2. Press control again to unfold the mirrors. Note: Do not stop the mirrors midway through their movement. Wait until the mirrors stop moving and press the control again.

98

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting