2018-F150-Owner's Manual

Load Carrying

Note: You can use a smooth surface tool to rotate the stops.

6. Pull the location pin outward and extend the ramp until the pin is seated in the usage position, then set the ramp on even ground. Stowing the Bed Ramp 1. Pick up the ramp. Pull the location pin outward. 2. Slide the ramp into the storage position until the location pin locks. Note: Make sure the proper pin location has been applied for your bed size. 3. Slide the ramp claw off of the tailgate plate. 4. Rotate the stops at the underside of the ramp to the closed position.

E194382 5. Slide the ramp claw onto the tailgate plate.

E194391 5. Place the ramp into the ramp holder. 6. Install the cambolts and close the cam lever arms. 7. Attach the front and rear cables. Note: Make sure you properly secure the locking cable. If the locking cable is unsecured, you may hear a rattling noise.

E194383

277

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting