2018-F150-Owner's Manual

Towing

Note: The default option is low. This is recommended for most trailers. If the trailer's brakes require more initial voltage, or if you prefer more aggressive braking then select the other options as required. 6. Select the trailer type. Some examples of conventional type trailers are shown below. Note: You cannot use the system with the types of trailers marked with the cross. The systemonly works with conventional trailers. It does not work with other types including goose neck and fifth wheel.

Note: Position the sticker on a flat, dry and clean horizontal surface. For best results apply the sticker when temperatures are above 32°F (0°C). Note: Do not move stickers after they are placed. Do not re-use any stickers if removed. Note: Additional stickersmay be purchased through your authorized dealer.

E209805 Use the supplied measurement card, a tape measure and pen to carefully mark the area where to attach the sticker. The sticker is supplied in the back cover pocket of your quick start guide. Make sure the entire sticker is within the gray zone between the two arcs or distance markers on the diagram, and is also visible in the rear view camera display. Once you have found the correct location, place the sticker. Step 4: TakeMeasurements After you place the sticker on the trailer you must take some measurements. Note: You must take accurate measurements for the system to operate properly.

E209766 Follow the information display prompts. Step 3: Place the Sticker on the Trailer Frame You must place the sticker in an area visible by the rear view camera. Note: The cargo and trailer hookup lamps turn on automatically to improve visibility. Note: An assistant can help to carry out the following procedure. Note: Make sure nothing can obstruct the rear view camera's view of the sticker. For example, items such as a jack handle or wiring.

283

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting