2018-F150-Owner's Manual

Maintenance

Headlamp Aiming Target

2

E142592

4

A B C

8 feet (2.4 meters).

Center height of lamp to ground.

25 feet (7.6 meters).

3

Horizontal reference line. D Vertical AimAdjustment 1. Park your vehicle directly in front of a wall or screen on a level surface, approximately 25 ft (7.6 m) away. 2. Measure the height from the center of your headlamp (indicated by a 3.0 millimeter circle on the lens) to the ground and mark an 8 ft (2.4 m) horizontal reference line on the vertical wall or screen at this height (a piece of masking tape works well). Note: To see a clearer light pattern for adjusting, you may want to block the light from one headlamp while adjusting the other. 3. Switch on the lowbeamheadlamps to illuminate the wall or screen and open the hood. Cover one of the headlamps so no light hits the wall.

E205141

2. Lift thewiper bladeprimary locking clip. 3. Press the wiper blade secondary locking clip. 4. Remove the wiper blade. Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. 5. Install in the reverse order. Note: Make sure that the wiper blade locks into place. ADJUSTINGTHEHEADLAMPS Vertical AimAdjustment The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, contact an authorized dealer to check and realign your headlamps.

361

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting