2018-F150-Owner's Manual

Maintenance

Horizontal AimAdjustment Horizontal aim is not required for this

vehicle and is not adjustable. CHANGING A BULB WARNING

Make sure the bulbs have cooled down before removing them. Failure to follow this warning could result in serious personal injury. Note: Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated. Note: If the bulb is accidentally touched, clean it with rubbing alcohol before installing it. AccessingtheHalogenHighBeam, LowBeamandDirection Indicator Bulbs 1. Rotate the steering wheel to the opposite side of the bulb needing replacement. 2. Remove two screws and one push pin from the front of the wheel liner.

E167358 4. For halogen or LED headlamps: On the wall or screen you will observe a light pattern with a distinct horizontal edge toward the right. If this edge is not at the horizontal reference line, youwill need to adjust the beam so the edge is at the same height as the horizontal reference line.

E163806 5. Locate the vertical adjuster on each headlamp. Use a #2 Phillips screwdriver to turn the adjuster either counterclockwise or clockwise in order to adjust the vertical aim of the headlamp. 6. Repeat Steps 3 through 7 to adjust the other headlamp. 7. Close the hood and turn off the lamps.

362

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting