2018-F150-Owner's Manual

Seatbelts

Seatbelt LockingModes WARNING

Automatic LockingMode In this mode, the shoulder belt

automatically pre-locks. The belt still retracts to remove any slack in the shoulder belt. The automatic lockingmode is not available on the driver seatbelt. When to Use the Automatic Locking Mode Use this mode any time you install a child safety seat in a front outboard passenger seating position in a Regular Cab, SuperCab, SuperCrew or any rear seating position of a SuperCab or SuperCrew. The optional front seat center seatbelt has a cinch mechanism. Properly restrain children 12 years old and under in a rear seat whenever possible. See ChildSafety (page 18). How to Use the Automatic Locking Mode Non-inflatable seatbelts

After a crash, have a qualified technician check all the seatbelts to make sure the seatbelts including the automatic locking retractor feature for child restraints operate properly. We recommend replacing any systemthat has damage or does not operate properly. Failure to do so can result in personal injury or death in the event of a sudden stop or another crash. All safety restraints in the vehicle are combination lap and shoulder belts. The driver seatbelt has the first type of locking mode, and the front outboard passenger and rear seat seatbelts have both types of locking modes described as follows: Vehicle SensitiveMode This is the normal retractor mode, which allows free shoulder belt length adjustment to your movements and locking in response to vehicle movement. For example, if the driver brakes suddenly, turns a corner sharply, or the vehicle receives an impact of about 5 mph (8 km/h) or more, the combination seatbelts lock to help reduce forward movement of the driver and passengers. In addition, the retractor is designed to lock if you pull the webbing out too quickly. If the seatbelt retractor locks, slowly lower the height adjuster to allow the seatbelt to retract. If the retractor does not unlock, pull the seatbelt out slowly then feed a small length of webbing back toward the stowed position. For rear seatbelts, recline the rear seat backrest or push the seat backrest cushion away from the seatbelt. Feed a small length of webbing back toward the stowed position.

E142591 1. Buckle the combination lap and shoulder belt. 2. Grasp the shoulder portion and pull downward until you pull the entire belt out. 3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the seatbelt is now in the automatic locking mode.

39

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting

Made with FlippingBook - Online Brochure Maker