2018-F150-Owner's Manual

Seatbelts

If...

Then...

You and the front seat passenger buckle your safety belts before you switch the ignition on or less than 1-2 minutes elapse after you switch the ignition on... You or the front seat passenger do not buckle your safety belts before your vehicle reaches at least 6 mph (9.7 km/h) and 1-2 minutes elapse after you switch the ignition on... The safety belt for the driver or front passenger is unbuckled for about 1 minute while the vehicle is traveling at least 6mph (9.7 km/h) and more than 1-2 minutes elapse after you switch the ignition on... Deactivating and Activating the Belt-Minder Feature WARNING While the system allows you to safely belted and surviving an accident. We recommend you leave the system activated for yourself and others whomay use the vehicle. Note: The driver and front passenger warnings switch on and off independently. When you perform this procedure for one seating position, do not buckle the other position as this will terminate the process. Note: If you are using MyKey, you cannot disable the Belt-Minder. Also, if the Belt-Minder has been previously disabled, it will be re-enabled during the use of MyKey. See MyKey™ (page 62). deactivate it, this system is designed to improve your chances of being

The Belt-Minder feature will not activate.

The Belt-Minder feature activates, the safety belt warning light illuminates and a warning tone sounds for 6 seconds every 25 seconds, repeating for about 5 minutes or until you and the front seat passenger buckle your safety belts. The Belt-Minder feature activates, the safety belt warning light illuminates and a warning tone sounds for 6 seconds every 25 seconds, repeating for about 5 minutes or until you and the front seat passenger buckle your safety belts. Read Steps 1 - 4 thoroughly before proceeding with the programming procedure. Before following the procedure, make sure that: • The parking brake is set. • The transmission is in park (P). • The ignition is off. • The driver and front passenger safety belt is unbuckled. 1. Switch the ignition on. Do not start the engine. 2. Wait until the safety belt warning light turns off (about one minute). After Step 2, wait an additional 5 seconds before proceeding with Step 3. Once you start Step 3, you must complete the procedure within 30 seconds.

43

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting