2018-F150-Owner's Manual

Lighting

GENERAL INFORMATION Condensation intheExteriorFront Lamps and Rear Lamps Exterior front lamps and rear lamps have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation. Clearing timemay take as long as 48hours under dry weather conditions. Examples of acceptable condensation are: • The presence of a finemist (no streaks, drip marks or large droplets). • A finemist covers less than 50%of the lens. Examples of unacceptable condensation are: • A water puddle inside the lamp. • Streaks, drip marks or large droplets present on the interior of the lens. If you see any unacceptable condensation, have your vehicle checkedby an authorized dealer.

LIGHTING CONTROL

E142449

A B

Off.

Parking lamps, instrument panel lamps, license plate lamps and rear lamps.

Headlamps. C Headlamp High Beam

E167827 Push the lever away from you to switch the high beam on. Push the lever forward again or pull the lever toward you to switch the high beams off.

89

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting

Made with FlippingBook - Online Brochure Maker