2018-F150-Owner's Manual

Lighting

Press repeatedly or press and hold until you reach the desired level. DAYTIME RUNNING LAMPS WARNING during low visibility driving conditions. Make sure you switch the headlamps on, as appropriate, during all low visibility conditions. Failure to do so may result in a crash. Type One - Conventional (Non- Configurable) The daytime running lamps turn on when: 1. Switching the ignition on. 2. The transmission is not in park (P) for vehicleswith automatic transmissions, or releasing the parking brake for vehicles with manual transmissions. 3. The lighting control is in the off, parking lamp or autolamps positions. 4. The headlamps are off. Type Two - Configurable Switch the daytime running lamps on or off using the information display. See Information Displays (page 112). The daytime running lamps turn on when: 1. The lamps are on in the information display. 2. Switching the ignition on. 3. The transmission is not in park (P) for vehicleswith automatic transmissions, or releasing the parking brake for vehicles with manual transmissions. 4. The lighting control is in the autolamps position. 5. The headlamps are off. The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting

The other lighting control switch positions do not turn on the daytime running lamps. If the daytime running lamps are off in the information display, the lamps stay off in all switch positions. AUTOMATIC HIGH BEAM CONTROL (If Equipped) WARNING The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the high beams on or off. The systemturns on high beams if it is dark enough and no other traffic is present. If it detects an approaching vehicle’s headlamps or tail lamps, or street lighting ahead, the system turns off high beams before they can distract other road users. Low beams remain on. Note: The systemmay not operate properly if the sensor is blocked. Keep thewindshield free from obstruction or damage. Note: The systemmay not operate properly in cold or inclement conditions. You can switch on the high beams by overriding the system. Note: If the system detects a blockage, for example bird droppings, bug splatter, snow or ice, the systemgoes into lowbeammode until you clear the blockage. Amessagemay appear in the information display if the camera is blocked. Note: Using much larger tires or equipping vehicle accessories such as snowplows can modify your vehicle's ride height and degrade automatic high beam control performance.

91

F-150(TFC)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201709,SecondPrinting

Made with FlippingBook - Online Brochure Maker