NuStar Safety Committee Minutes September 2012

Nustar Energy – Functional Safety Committee Minutes of Meeting September 2012

4.2.4 The frequency of mechanical integrity activities shall take into account good engineering practices.

4.2.5 The records of inspections and tests of the instrumented safety functions shall contain the following minimum documentation:

a) Date of inspection or test

b) Name of person who performed the inspection or test

c) Serial number or other unique identifier of the equipment on which the inspection or test was performed

d) Description of the inspection or test performed

e) Results of the inspection or test as compared to user-defined acceptance criteria (e.g., as-found and as-left conditions)

Informative References and Related Documents

5.1 Occupational, Safety, and Health Administration (OSHA), “Process Safety Management of Highly Hazardous Chemicals; Explosives and Blasting Agents,” 29 CFR Part 1910, Federal Register 57, 36, Washington, DC (1992).

5.2 Environmental Protection Agency (EPA), “Accidental Release Prevention Requirements,” 4 0 CFR Part 68, Federal Register 61, 120, Washington, DC (1996).

5.3 Directive 96/82/EC of the European Parliament and the Council of 9 December 1996 on the Control of Major Accident Hazards Involving Dangerous Substances and Directive 2003/105/EC of the European Parliament and the Council of 16 December 2003 Amending Council Directive 96/82/EC on the Control of Major Accident Hazards Involving Dangerous Substances.

5.4 Control of Major Accident Hazards Regulations 1999, Statutory Instrument 1999/743 (as amended), Her Majesty's Stationery Office, London 1999, ISBN 0 11 082192 0.

5.5 Guidelines for Safe and Reliable Instrumented Protection Systems, Center for Chemical Process Safety, May 2007, ISBN 978-0-471-97940-1.

DRAFT ONLY – NOT A PUBLISHED STANDARD

P & I Design Ltd

DOCUMENT NO: NU001104_MIN

2 Reed Street, Thornaby, UK, TS17 7AF Tel: + 44 (0)1642 617444 Fax: + 44 (0)1642 616447 www.pidesign.co.uk

Made with