html-Catalog FORMAT plus - EDE 2015 - 2017
HSS Burrs 1376
HSS burr Applications recommendations: 1. HSS burrs, thanks to their special tooth geometry and high production quality, partricularly suitable for deburring, chamfering, cast-iron fettling and processing aluminium. They can also be used cost-effectively with low-power machines in the low turning rate range.
2. HSS burrs should be used with low-rev machines, compared to hard-metal burrs. 3. They are not to available for applications where there are high rev rates.
4. The toughness of high-speed steel (HSS) gives greater stability to the tooth cutting.
1 teeth without chip deflector.
3 teeth with chip deflector.
5 teeth without chip deflector.
Observe safety recommendations:
Please observe the recommended turning speeds!
Material groups
Processing
Toothing
Cutting speed
course machining = greater material removal fine machining = lower material removal course machining = greater material removal fine machining = lower material removal course machining = greater material removal fine machining = lower material removal course machining = greater material removal fine machining = lower material removal course machining = greater material removal fine machining = lower material removal
uncured, un- tempered steel up to 1200 N/mm 2 (< 38 HRC)
3
60– 80 m/min
construction steels, carbon steels, tool steels, unalloyed steels, case-hardened steels, cast steel
Steel, steel casting
3 5
80–100 m/min 60– 80 m/min
1
60– 80 m/min
Stainless steel INOX
rust and acid- resistant steels
austenitic and ferritic stainless steels
1
80–100 m/min
alu alloys, brass, copper, zinc
1
NF metals soft NF metals
200–300 m/min
Cast iron with lamellar graphite EN-GJL (GG), with nodular graphite/ductile iron EN-GJS (GGS), white malleable EN-GJMVV (GTW), black malleable EN-GJMB (GTS)
3
60– 80 m/min
Cast iron gray cast iron, white cast iron
3 5
80–100 m/min 80–100 m/min
1
200–300 m/min
Synthetics, other materials
fibre-reinforced, thermoplastic and duro-plastic synthetics, hard rubber, wood
1
250–300 m/min
Example: HSS burrs, 1 tooth, ∅ 12 mm. Course machining of soft
Cutting speeds m/min
NF metals. Speed: 200–300 m/min. turning rate range: 5400–8000 min -1 .
60
80
100
200
250
300
Revolutions min -1
Burr ∅ mm
8 Abrasives
2,3 3,2
8400 11100 13900 27700 34600 41600
6000 4800 3900 3200 2800 2400 2000 1600 1400 1200
8000 10000 19900 24900 29900
4 5 6 7 8
6400 5100 4300 3700 3200 2600 2200 1900 1600
8000 16000 19900 23900 6400 12800 16000 19100 5400 10700 13300 16000
4600 4000 3200 2700 2300 2000
9100 11400 13700 8000 10000 12000
10 12 14 16
6400 5400 4600 4000
8000 6700 5700 5000
9600 8000 6900 6000
8/68
Made with FlippingBook