html-Catalog FORMAT plus - EDE 2015 - 2017

231

Die stocks

Die stocks

Design: HSS, EN 22568, closed, pre-slotted form, with spiral point form on both sides from M3. Bright surface. Application: For regular metric threads according to ISO DIN 13. Note: HSS-E PM is distinguished by its high resilience (stronger edge stability, wear resistance) and a higher tool life.

M EN

60°

22568

1800 1801 1804

1 Cutting Tools

HSS, tolerance range 6g

HSS, tolerance range 6e with undersize 0.03 mm.

1801

HSS

HSS-E, lapped and nitrated (from M3), tolerance range 6g.

bright

1804 Nitrated

1800

HSS

HSS-E

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1800 1801 1804

9 9 9

5

5

Thread 1800

1801

1804

Thread 1800

1801

1804

Order No.

Gradient

Outer ∅ x height mm

Order No.

Gradient

Outer ∅ x height mm

mm

mm

bright

bright

Nitrated

bright

bright

Nitrated

0020 0025 0030 0040 0050 0060 0070 0080 0090 0100

M2

14.40 13.40

– –

36.50 31.40

0.40 16 x 5 0.45 16 x 5 0.50 20 x 5 0.70 20 x 5 0.80 20 x 7 1.00 20 x 7 1.00 25 x 9 1.25 25 x 9 1.25 25 x 9 1.50 30 x 11

0120 0140 0160 0180 0200 0220 0240 0270 0300

M12 M14 M16 M18 M20 M22 M24 M27 M30

20.90 38.20 40.40

1.75 38 x 14 2.00 38 x 14 2.00 45 x 18 2.50 45 x 18 2.50 45 x 18 2.50 55 x 22 3.00 55 x 22 3.00 65 x 25 3.50 65 x 25

M2.5

21.50 28.00 29.40 29.40 43.20 43.20 69.50 69.50

– – – – – – – –

41.40 54.20 55.40 55.40 82.70 82.70 143.00 212.00

M3 M4 M5 M6 M7 M8 M9

11.90 25.80 24.00 11.90 24.60 22.70 11.90 21.80 21.10 11.90 21.80 21.10

21.10

–

37.80

12.95 24.00 25.30

27.70

–

101.50

(174)

(174)

(174)

M10

16.05 28.70 30.30

(174)

(174)

(174)

Die stocks set

Design: HSS, EN 22568, closed, pre-slotted form, with spiral point form on both sides from M3. Bright surface Application: For regular metric threads according to ISO DIN 13. Die stocks set M3–M12 in plastic cassette.

1800

1804

HSS

HSS-E

bright

Nitrated

1800

1804

Set contents

Order No.

bright

Nitrated

0001

M3; 4; 5; 6; 8; 10; 12

104.50

188.00

(174)

(174)

Die stocks for left thread

Design: HSS, EN 22568, tolerance range 6g, closed, pre-slotted form, with spiral point form on both sides from M3. Bright surface Application: For metric left threads according to DIN ISO 13.

M-LH HSS EN 22568

60°

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1808

9

1808

1808

Thread

Thread

Order No.

Gradient

Outer ∅ x height

Order No.

Gradient

Outer ∅ x height

mm

mm

mm

mm

bright

bright

0020 0030 0040 0050 0060 0080

M2 M3 M4 M5 M6 M8

37.40 27.70 26.20 24.40 24.40 26.80

0.40 0.50 0.70 0.80 1.00 1.25

16 x 5 20 x 5 20 x 5 20 x 7 20 x 7 25 x 9

0100 0120 0160 0200 0240

M10 M12 M16 M20 M24

32.40 42.90 56.10 56.10 81.60

1.50 1.75 2.00 2.50 3.00

30 x 11 38 x 14 45 x 18 45 x 18 55 x 22

(174)

(174)

1/211

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.