FlyQ Pilot's Guide
Version 2.3
New Features and Improvements
Integration with Dynon SkyView and AFS 5000 o
Receive GPS and AHRS from the in-panel system o Send flight plans from FlyQ EFB to SkyView/AFS o Receive flight plans from SkyView/AFS
Integration with Microsoft Flight Simulator and Prepar3D (in addition to existing support for X-Plane) Altitude gauge now displays “Pressure Alt” when connected to an ADS-B source that supplies pressure, rather than GPS, altitude Fixes FIXED: Incorrect altitude display when ADS-B sends altitudes below sea level FIXED: Time rings always display “0” FIXED: SA Airport diagram not in the procedure scroller when added from the Procedures button in Search results FIXED: Lat/lon for user-defined points gets reversed after using the Reverse button
Version 2.2
New Features and Improvements
300% faster mapping engine
New photographic (satellite imagery) base map New terrain base map New road base map New SA Airport Diagrams covering 4,600+ airports All-new TFR system including sports TFRs Comprehensive Search and Rescue routing engine Waypoint idents now displayed on the flight plan line Added ground elevation for any point FAA and SA Airport Diagrams can now be overlaid on the map Added VSR (vertical speed required) gauge Support for the Dual XGPS 190 ADS-B with AHRS Support for the L-3 Lynx ADS-B Experimental support for the Stratux AHRS (other Stratux ADS-B features are fully-functional and not experimental) Import flight plans via an email link from AOPA Flight Planner TCrs and MagVar added to the NavLog Lat/lon, CAP grid reference, navaid/dist/bearing and navaid intersections now accepted anywhere a standard ident (airport, navaid, fix, etc.) can be used. Added several new aircraft to the database
FlyQ EFB Pilot’s Guide
Version 3.0 (2/8/2018)
Page 11
Made with FlippingBook - Online magazine maker