FlyQ Pilot's Guide

Direct To and +FP

You can create or modify flight plans directly from the map by double-tapping the map. If the desired point is not already on your flight plan, or you have no flight plan, the Direct To button creates a new flight plan from your current location to the selected point. If the selected point is already on the current plan, FlyQ EFB will delete the points before the selected point and fly directly to the point. Unlike Direct To , +FP (Add to Plan) does not clear the current plan. Rather, it asks where within the current plan you’d like to insert the new point. Tap the Add to end button to append the new point to the plan rather than insert between existing points. If +FP is tapped when no flight plan is loaded, the new point becomes the first point in the plan so new additional popup appears.

Tip: You can create an entirely new plan using +FP even if a flight plan is already loaded by using the Clear button on the Plans/NavLog tab.

FlyQ EFB Pilot’s Guide

Version 3.0 (2/8/2018)

Page 75