FlyQ Pilot's Guide
For the Dual XGPS-170 or 190:
Turn the XGPS-170/190 to ADS-B Let it warm up for about a minute.
Go to the Settings app on the iPad or iPhone. Turn Airplane mode ON . This disables all wireless services that might interfere with FlyQ EFB. Turn only Bluetooth ON . Leave all other wireless systems off. If the receiver has not yet been paired with your iPad or iPhone, do so now. You should see FlyQ EFB notify you of a connection within one minute.
Tip: Tap the Layers button on the map and be sure the Traffic map layer on. The Traffic layer is not automatically turned on when an ADS-B receiver is connected.
FlyQ EFB Pilot’s Guide
Version 3.0 (2/8/2018)
Page 93
Made with FlippingBook - Online magazine maker