XDRAINER

EN

CONNECT THE DRAINER TO THE WORKSHOP’S COMPRESSED AIR NETWORK

02

00

01

REMOVE THE CAP FROM THE EXPANSION TANK

THE VEHICLE MUST BE STATIONARY, WITH ITS ENGINE OFF AND COLD

> Coolant at room temperature.

> Connect the drainer to the workshop’s compressed air network using the male port located on the front of the equipment. The supply pressure must be comprised between 6.5 bar and 10 bar.

04

03

INSTALL THE UNIVERSAL ADAPTER INSTEAD OF THE CAP ON THE EXPANSION TANK

CONNECT THE DRAINER TO THE ADAPTER WITH THE SUCTION PIPE

> Check that the cone is airtight and the pipe is immersed as deeply as possible in the expansion tank.

15 / 124