Powerdeal EN 2026

Brakes

Pencil brake fluid tester

Digital calliper gauge for brake discs

NEW

FET-8P

FET-5J

GUARANTEE

GUARANTEE

Digital calliper gauge for measuring brake disc thickness. Fast and accurate wear measurement, with large display for clear reading in the workshop. Easy-to-use tool, specially designed for automotive professionals. Characteristics: Capacity: 0 to 50 mm. Length of the jaws: 50 mm. Giant display. HOLD function to freeze the measurement. Conversion from millimetres to inches. Reset to zero (initialised to “0”). Supplied with button cell battery.

Electronic brake fluid tester. Checks the amount of water contained in the brake fluid being tested. Can be used with DOT 4 brake fluids. 5 LEDs indicate the approximate amount of water in the tested fluid: 0%, 1%, 2%, 3%, 4%. Made of reinforced fibreglass thus avoiding any premature wear or damage to the device owing to contact with the brake fluid. Contains one 1.5V AAA type battery. Dimensions: 8.7cm x 2.8cm x 1.18cm (L x W x H)

HAND TOOLS AND PROFESSIONAL TOOLS TOOL SETS AND SELECTIONS SPECIALISED AUTOMOTIVE TOOLS WORKSHOP EQUIPMENT

Box set of impact screwdrivers

Pneumatic brake piston retractor kit with set of cups

270A-J24

3112-90

GUARANTEE

3/8''

5/16’’ IMPACT

GUARANTEE

Pneumatic brake piston retractor kit with set of cups. Powerful, rapid pressure tool powered by compressed air. 1/4” compressed air coupling. 3/8” square drive.

Selection of 24 tools supplied in a metal box. For loosening seized or stuck screws, nuts and bolts. Equipped with a reverser enabling tightening and loosening. Screwdriver length: 163 mm. The box comprises: the screwdriver, a bit-holder socket and 22 impact bits. Box dimensions: 195 x 59 x 45 mm

3/8''

Metal brush

Hub flange cleaning disc 90 - 150 mm

2880

1/2''

76NS-NF

GUARANTEE

GUARANTEE

Ideal for brake callipers.

Specially designed to be mounted on a power drill/screwdriver or an impact wrench, the tool is used for fast and easy cleaning of corroded hub flanges, dirty and stuck wheel rim contact surfaces, etc. Ideal when changing discs or tyres, the tightening torque is no longer impacted by the presence of rust or dirt. Characteristics: disc int. Ø 90 mm ext. Ø 150 mm, 1/2’’ drive

NEW

Brake pad wear tester An ingenious tool allowing you to save time when measuring the brake pad lining on vehicles without having to remove the wheel. Can be used on internal and external brake pads. Easily fits behind the brake pad’s backing plate and allows you to measure the distance between the underneath of the backing plate and the brake disk. Scale calibrated for a normal backing plate with a thickness of 6 mm.

Measurement indicator

FD J1

GUARANTEE

SAM.EU SAM ASSISTANCE SAM ADVICE: +33 (0)4 77 92 13 00

117