BuyLog Flippingbook MAR 2024

6-57

MOLDED CASE CIRCUIT BREAKERS, BUYLOG SECTION 6

— Formula Accessories Electrical accessories

Auxiliary contacts for electrical signals The auxiliary contacts allow information about the state of the circuit breaker to be available through an electronic signal to another apparatus. The signals available are as follows: • Form C (open/closed): signaling the position of the circuit breaker power contacts (Q) • Bell alarm (release trip): signaling circuit breaker opening due to tripping of the thermal-magnetic or electronic trip unit (due to overload or short circuit), of the opening of the shunt opening release or undervoltage release (SOR-C or UVR-C) or by activation of the test pushbutton (SY)

Auxiliary contacts AUX-C Q, AUX-C SY The auxiliary contacts for A1 and A2 snap into the special slot of the circuit breaker without the of use any screws. All the auxiliary contacts are supplied in the cabled version (20 AWG cable section/0.5 mm 2 ), with loose cables 1 m long. An AUX-C contact is also available as a spare part, and it can be used as Q or SY according to the slot of the circuit breaker in which it is inserted.

— 01 Cabled auxiliary contact

AUX-C — Electrical characteristics

— 01

Voltage (V)

Current (A)

Category of use (IEC 60947-5-1)

AC-12/AC-13/AC-14

125 125 250 250 110 110 250 250

6 5 6 4

AC-15

AC-12/AC-13/AC-14

AC-15 DC-12 DC-14 DC-12 DC-14

0.5

0.05

0.3

0.03

Diagrams

2Q + 1SY (A1, A2) 1Q + 1SY (A1, A2)

2Q + 1SY (A2) 1Q + 1SY (A1)

Two-pole circuit breaker

Three-pole circuit breaker