Control Catalog
Pilot and Signaling Devices Heavy-Duty 30.5 mm Watertight/Oiltight Push Buttons
Section 9
CR104P Technical Data 600 Volts Max. AC/DC 10 Amperes Continuous
in.
Materials List Component Cap (non-illuminated)
Outlines, Dimensions ( mm ) (For Estimating Only)
Material
Unfilled polyacetal
Polycarbonate
Cap (illuminated) Metal housings Plastic housing White plunger
Chromium- or zinc-plated zinc ingot
Nylon
Unfilled polyacetal
Flange Grease
Nylon
Good for temperatures of –42° to +204°C
Polycarbonate
Plate spacer Locking plate Locking ring Hexagonal ring
Chromium-plated zinc ingot Chromium-plated zinc ingot Chromium-plated zinc ingot
Contact block housing
Nylon
Cam
Unfilled Polyacetal Unfilled Polyacetal
Cam follower
Joystick protective housings
Vinyl nitrile
Terminal screw size
#6-32
Drilling Plan Dual Dimensions
Vinyl nitrile Silver alloy
Gasket
Contacts
CR104P push buttons are designed for front mounting, with or without nameplates, in 1 13/64” (30.5 mm) diameter holes. Operators are provided with an octagonal ring, spacers, and gaskets to ensure an oiltight , uniform front protrusion. Acceptable Panel Thickness: 0.04 - 0.25 inches (1.02 - 6.35 mm)
Push button guards
Chromium-plated zinc ingot
Wobble stick
Aluminum
Key
Brass
Protective caps
Silicon rubber Polycarbonate
Locking attachment
Mechanical Life Ratings Operator
Number of Operations
Standard push buttons
3,000,000 1,000,000 3,000,000 500,000 1,000,000 500,000 1,000,000 500,000 1,000,000 1,000,000 500,000
Illuminated push buttons (including push on/push off) Momentary mushroom-head push buttons Maintained and push-to-latch, turn-to-release mushroom-head push buttons
Selector switches (all)
Joysticks
Toggle switches Wobble switches
Key-operated push buttons Selector push buttons Time-delay push buttons
Electrical Life Ratings Operator
Number of Operations
Push buttons
5,000,000 500,000
Selector switches
For dimensional information on other operators, contact nearest GE Representative. Manufacturing tolerances apply to all untoleranced dimensions. Outline and Dimensions
Panel thickness (inches)
No. of washers required
.062 .093 .125 .188
3 2 2 1 0
.25
Rev. 4/16 Prices and data subject to change without notice
www.geindustrial.com
Control Catalog
9-49
Made with FlippingBook - Online catalogs