Control Catalog

Drives AF-650GP ™ General Purpose Drive Options and Accessories

Section 15

Programmable Input/Output Module Programmable I/O module for use on the AF-650GP drive has 3 outputs and 3 inputs to extend the available I/O selection on the control card. It can be used to achieve multi-zone control with 3 pressure transmitters, and provide digital output for driving a relay, input to PLC I/O cards and input to another VFD in sequentially-controlled application.

Programmable Input/Output Module

Description

Product Number

Programmable I/O Module

OPCPRGIO

Encoder Module Encoder internal drive mounted module for use on the AF-650GP ™ drive. Module supports all 5V incremental encoders. Also supports Hyperface SinCos encoders.

Description

Product Number

Encoder Input Module

OPCENC

Encoder Module

Resolver Module Resolver internal drive mounted module for use on the AF-650GP ™ drive. Module supports 4-8Vrms, 2.5kHz - 15kHz, 50mA resolvers. Resolution is 10bit at 4Vrms.

Description

Product Number

Resolver Input Module

OPCRES

Relay Output Module Relay Output internal drive mounted module for use on the AF-650GP ™ and AF-600FP ™ drives. Module adds (3) Form C relay outputs to the drive. Relays are rated at 2A at 240V resistive load.

Resolver Module

Description

Product Number

Relay Output Module

OPCRLY

24V DC External Supply Module 24V DC External Supply internal drive mounted module for use on the AF-650GP ™ and AF-600FP ™ drives. This module accepts an external 24V DC supply which is used to keep the control board of the drive and other option modules powered in the event of a Line side power outage. Can be used with Communications and I/O Modules.

Relay Output Module

Description

Product Number

24V DC External Supply Module

OPC24VPS

Safe PLC I/O Module Safe PLC I/O internal drive mounted module for use on the AF-650GP ™ drive. This module provides a safety input based on a single pole 24V DC input .

Description

Product Number

Safe PLC I/O Module

OPCSAFE

24V DC External Supply Module

Screw Terminal Accessory Screw Terminal Accessory is available for field installation on AF-650GP ™ and AF-600FP ™ drives. These screw terminals can replace the cage clamp terminals which ship with each drive. This set of three terminals are for the digital inputs, analog I/O, and RS485 connection.

Description

Product Number

Screw Terminal Accessory

OPCTERM

Safe PLC I/O Module

Rev. 4/16 Prices and data subject to change without notice

www.geindustrial.com

Control Catalog

15-15