Control_Flippingbook_October 2023

1-74

NEMA FULL VOLTAGE POWER DEVICES, CONTROL SECTION 1

— CR410 magnetic starters Reversing, combination, thermal magnetic circuit breaker type

Part number configuration Valid for NEMA sizes 0-4

— Step 7 (digit 15) select push button/selector switch

Push button/selector switch — heavy duty

Code

None

A

Fwd/rev/stop push button Up/down/stop push button Open/CLS/stop push button HOA and fwd-rev selector switch Fwd-off-rev selector switch

J

K L P T

— Step 8 (digit 16) select pilot device

Pilot light (heavy duty CR104P style) type

Color — functionality

Code

None

A 2 3 5 S T Y

LED lights

Red and amber across coils Red and green across coils

Red and amber across coils and unwired green

Push-to-test lights

Red and amber across coils Red and green across coils

Red and amber across coils and unwired green

— Step 9 (digit 17) select control options

Device

Code

None

A

1 relay, 2NO-2NC, 24/120 V Coil — unwired

B 4 C 4

2 relays, 24/120 V Coil — unwired

DIN rail - for customer use

D E

12 point terminal strip — unwired (12 PT strip)

Space heater w/ NC contact

H 5

1 relay + 12 PT strip 2 relays + 12 PT strip

J 4

K 4 L 5

DIN rail + 12 PT strip + space heater 2 relays + 12 PT strip + space heater

M 4,5

Time delay on relay, 24/120 V coil — unwired (TD) Time delay off relay, 24/120 V coil — unwired (TD)

N 4 P 4 R 4 S 4

12 PT strip + TD ON 12 PT strip + TD OFF

12 PT strip + space heater + TD ON 12 PT strip + space heater + TD OFF

T 4,5 U 4,5

4 Relay/timer coil voltage is equivalent to CPT secondary voltage. Requires minimum 100 extra VA CPT option. 5 Maximum number of auxiliary contacts shall be reduced by 1.

General note: On NEMA size 3 and 4 starters, if selecting factory installed and wired operator devices (push buttons, selector switches, and/or pilot lights) then control circuit fusing, a control power transformer, or 120 V separate sourced control is required when the protective device is rated greater than 100 amps.