GE Products BuyLog Smart Catalog

Low Voltage Power & Insulated Case Circuit Breakers Section 8

WavePro Low Voltage Power Circuit Breakers

Step 9 Select Second Shunt Trip If you selected a shunt trip in Step 5 and require another, select your second shunt trip option. Transfer the product number digit to the box marked Step 9 in the Product Number Line. Note: Second shunt trip requires the selection of a 7-stage auxil- iary switch in Step 7 .

Voltage

Product No. Digit

1 X

None 120V, 60 Hz

240V, 60 Hz

3

24Vdc

B

110/125Vdc

E

250Vdc

F

Step 10 Select Additional Options Select your combination of additional options. Transfer the product number digit to the box marked Step 10 in the Product Number Line.

A-Disconnect 1 “PM Ready”

Remote Charge Indicator

Hidden Close Push Button 2

Operation Counter

Product No. Digit X (none)

A B C D

E F

G H J K L

Optional Hidden Close button feature shown

1 The 36-point A-Disconnect is automatically supplied if any of the following options were selected in previous steps: —zone selective interlock —shunt trip —auxiliary switch

—bell alarm —undervoltage trip

—electrical lockout device —electric charge and close

—MicroVersaTrip PM trip unit (”M” or “PM” option) Select the A-Disconnect here only if (1) none of these options were selected in previous steps and 4-wire ground fault is required or (2) none of these options were selected in previous steps and your WavePro breaker is to be “PM ready.” “PM ready” wiring includes inputs for 24V dc auxiliary power, communications, and 3 phase voltage. 2 Available only on breakers with electrical charge and close option.

Rev. 1/19 Data subject to change without notice

GE Products BuyLog

go.abb/industrial

8-38