Breckland Scientific 2023 Catalogue

Water Purification

Water Stills

a

1 WATER STILL - MERIT The Merit is the ideal choice for budget conscious laboratories that can’t afford to compromise on quality. It combines economy and high performance with a host of other features which comparable stills cannot match. The built in acid addition funnel and drain stopcock allow easy descaling without dismantling the glassware. The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time producing cold distilled water and pre-heating the boiler feed to increase efficiency. Screw threads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage. Safety features include two independent safety thermostats to prevent over heating in the event of failure of the water supply. The stand is pre-drilled to facilitate wall mounting. Output: 4 litres/hr, single distilled. Overall size (W x D x H) 470 x 150 x 440mm. 220/240V. PLEASE NOTE: Not supplied with 13A plug, as unit must be hard wired to mains supply via a 30mA RCD with over-protection and continuous current carrying capacity of 15A at 250V. Also, due to the delicate glass parts in water stills, some assembly is required, as the units are too fragile to ship fully assembled. Cat No. Description Price Per WAT-300-100 Merit Water Still 1067.79 ea. WAT-300-150 Merit Water Still Replacement Boiler 373.78 ea. WAT-300-200 Merit Water Still Heating Element 3kW 593.54 ea. WAT-250-200 Water Still Spare Condenser 573.10 ea. 2 WATER STILL - DISTINCTION 4000 All glass construction with silica sheathed heaters ensures top purity distillate at an economical price. Comes fitted with a control device to turn off the heater when the collecting reservoir is full, to prevent overflow if the still is inadvertently left switched on when unattended. Also includes two independent safety thermostats to prevent over heating in the event of an interruption to the water supply. The unique condenser design ensures that the droplets of distilled water remain in contact with the cooling coil for the longest possible time producing cold distilled water and pre-heating the boiler feed to increase efficiency. Screw threads are incorporated on all water connections so hoses can be fitted and removed easily and safely without risk of breakage, and a built in acid addition funnel and drain stopcock allow easy de-scaling without dismantling the glassware. The stand is pre-drilled to facilitate wall mounting. Output: 4 litres/hr, single distilled. Overall dimensions (W x D x H) 540 x 160 x 410mm. 220/240V. PLEASE NOTE: Not supplied with 13A plug, as unit must be hard wired to mains supply via a 30mA RCD with over-protection and continuous current carrying capacity of 15A at 250V. Also, due to the delicate glass parts in water stills, some assembly is required, as the units are too fragile to ship fully assembled. Cat No. Description Price Per WAT-250-100 D4000 Still 1798.60 ea. WAT-250-150 D4000 Water Still Spare Boiler 792.39 ea. WAT-250-200 Water Still Spare Condenser 573.10 ea. WAT-250-250 Water Still Spare Heater 269.73 ea.

1

b

c

d

e

f

g

h

i

j

Water Still - Merit

k

l

m

2

n

o

p

q

r

s

Water Still - Distinction D4000

t

v

w

482

Value | Service | Expertise