HexArmor Law Enforcement Catalog

First page 1 Next page Last page

Authorised Distributor: Northrock Safety Equipment Pte Ltd

LAW ENFORCEMENT

We started a journey almost two decades ago. A group of hardworking people with a new technology that no one had ever seen. One that had the potential to change what workers thought of PPE. One that could change the lives of people across the world. Starting with one industry and one glove, we changed, altered, tested, and trialed until we began eliminating hand injuries for a few large companies. Eliminated – as in zero – none. That’s when we knew we were on to something. We started designing purpose-built arm, leg, and body protection, working side-by-side with our customers, creating solutions where others couldn’t – and have since defined the market for high-performance cut, puncture, needle, and impact resistance… and more. In 2016, we partnered with a German-based personal protective equipment manufacturer with over 90 years of experience to offer safety eyewear, safety helmets, and hearing protection in North America with the mission of sending every worker home safe, every day.

Our technical expertise is backed by decades of innovation, helping us to create the most advanced line of PPE in the industry.

Because in the end, we aren’t just PPE. We’re the confidence, safety, and livelihood of every worker we protect.

2 | HexArmor ® Law Enforcement

Needlestick injuries: what’s the risk?

5 6 7 8

Puncture resistance Needlestick protection

Law enforcement & corrections

Safety eyewear

12 20 21

The importance of a glove trial

Proper glove care

Call 1.877.MY.ARMOR or visit www.hexarmor.com | 3

“Search and seizure always comes with inherent risk. You just never know what dangerous hazards are lurking. Our HexArmor ® gloves mitigate the risk and provide peace of mind.”

Sergeant Sean O’Rourke County Sheriff Department

4 | HexArmor ® Law Enforcement

The cost of needlestick injuries Although there are no exact numbers on how many work related needlestick injuries occur each year across the US, estimates indicate that 600,000 to 800,000 injuries occur annually, about half of which go unreported. The Center for Disease Control estimates that more than half of those needlestick injuries occur outside of hospitals, in the field or workplace where danger is higher and immediate ramifications can be more severe Needlestick injuries: What’s the risk?

Needle exposure can cost from $5,000 $36,000 for initial evaluation to for ongoing treatment

According to the American Hospital Association, a single case of serious infection by bloodborne pathogens can add up to $1 million or more in expenses for testing, lost work time, and disability payments. Even when no infection occurs, the cost to an organization is a minimum of $5,000 for initial evaluation, up to $36,000 for ongoing treatment and time off work. Reports conducted within the last few years indicate that as high as 8% of police officers have recorded needlestick injuries while on the job. These injuries occur most commonly when officers were conducting pat-down searches, searches incident to arrest, property searches, and vehicle searches. Sticks or punctures from needles pose an elevated danger to officers due to the risk of infection from bloodborne pathogens such as hepatitis B and C, and HIV.* A 2017 report published by the U.S. Department of Health and Human Services recommends “providing officers with [needle- and] cut-resistant gloves for their use when they are performing searches and pat downs,” in addition to providing nitrile gloves and/or face shields, in order to combat the dangers of accidental needlestick injuries.* In 2016 alone, nearly 64,000 Americans died from drug overdoses – equating to roughly as many American deaths in the entire Vietnam, Iraq, and Afghanistan wars combined – and more than 122 people die every day from syringes of heroin, gel caps of fentanyl, and excess of oxycodone, according to a 2018 TIME article. This epidemic is affecting far more than users and their families. Because 60-80 percent of injection drug users have an infectious blood borne pathogen, men and women in public safety are experiencing higher risks on the job. First responders, firefighters, public safety officials, and correctional officers are exposed to more needlestick threat than ever before.**

*De Perio MD, Marie A. [2017]. Evaluation of Needlestick Injuries and Other Exposures to Bloodborne Pathogens Among Officers in a City Police Department. US Department of Health and Human Services Report No. 2016-0121-3284. https://www.cdc.gov/niosh/hhe/reports/pdfs/2016-0121-3284.pdf ** Time, [2018] The Opioid Diaries. http://time.com/opioid-addiction-epidemic-in-america/

Call 1.877.MY.ARMOR or visit www.hexarmor.com | 5

Safety technologies and testing: Puncture resistance

The ANSI/ISEA 105 test In February of 2016, the ANSI/ISEA 105 standard was updated and published to include two puncture standards: Puncture Resistance (other than hypodermic needle) and Hypodermic Needlestick Puncture. Prior to 2015, there was only one puncture test, which did not specify the type of puncture hazard that the standard was created for, leaving it open to interpretation. Having both an industrial puncture standard and a hypodermic needle puncture standard allows safety officials to differentiate between what protection they need most, based on more relevant testing and classification.

ANSI/ISEA 105 Industrial Puncture Resistance

ASTM F2878 Hypodermic Needlestick Puncture Resistance

EN388: Industrial puncture resistance (non-hypodermic needlestick puncture) The EN388 probe is the approved puncture test for ANSI/ISEA 105 and measures the amount of force needed for a blunt probe to pierce through the sample material (taken from palm).

• The blunt probe moves at a 90˚ angle at a speed of 100mm/minute • Results are reported in Newtons and are given a 1-5 classification rating, with 1 being low resistance and 5 being high resistance • The test is done 4 times for every palm sample • The lowest score is reported

ASTM F2878: Hypodermic needlestick puncture resistance The ASTM F2878 is the approved puncture test for ANSI/ISEA 105 and measures the amount of force needed for a 25-gauge hypodermic needle to pierce through the sample material.

• The puncture probe (25-gauge needle) travels at a 90˚ angle into the specimen at a speed of 500 millimeters per minute • Results are reported in Newtons and are given 1-5 classification rating, with 1 being low resistance and 5 being high resistance • The test is done 12 times for every palm sample • The average of the 12 results is reported

Our needlestick-resistant gloves and arm guards are thoroughly lab tested using actual 25-gauge needles to give you maximum protection and peace of mind.

6 | HexArmor ® Law Enforcement

Advanced needlestick technology HexArmor ® sets the industry standard for needle protection by providing needlestick solutions that layer SuperFabric ® * brand material inside the gloves (exclusively licensed to HexArmor ® in the industrial PPE market) . SuperFabric ® is available in a variety of base fabrics with guard plates applied to arrest, deflect and stop punctures from reaching the skin’s surface. When a needle meets a SuperFabric ® guard plate, the material blocks and deflects the hazard. Needlestick testing The international standard ASTM F2878 addresses the unique mechanics of hypodermic needle punctures related to PPE and is performed using a 25-gauge needle. Standardized safety tests like the ASTM F2878 have made the selection process easier for safety managers seeking out application-specific PPE. HexArmor ® Pointguard ® products utilize 2 or 3 layers of SuperFabric ® protection to deliver needle resistance levels of 4 or 5, the highest rating possible. Cut testing Unlike typical fiber-based needlestick gloves, HexArmor ® with SuperFabric ® is designed to prevent hazards from puncturing through and ultimately penetrating the skin’s surface. Most of our SuperFabric ® PPE maintains industry-leading A6 to A9 rated cut levels. Purpose-built protection, beyond “slash” resistance While leather general-duty gloves have long been the standard in law enforcement, HexArmor’s specialized Pointguard ® needlestick products offer extreme protection when the situation arises. Needle resistance is different from industrial puncture and different from most cut-resistant technology you’re used to. Pointguard products are far advanced from standard leather, nitrile, or knit gloves.

HexArmor ® 4041

LEVEL 5

10 Newtons

6000 Grams

LEVEL A9

Leather

general duty gloves

Leather

general duty gloves

Nitrile gloves

Nearest

competitor

Nearest

competitor

ANSI/ISEA CUT resistance

ANSI/ISEA NEEDLE resistance

Outer shell

Needle + cut resistance — premier safety for all hazards SuperFabric ® offers industry-defining needlestick protection. Unlike most other needle resistant technology, our needlestick resistance also boasts some of the highest cut resistance in the industry. This multi-faceted technology is something you won’t find in other needle resistant PPE.

3 layers

Skin surface

*SuperFabric ® is a registered trademark of HDM, Inc.

Call 1.877.MY.ARMOR or visit www.hexarmor.com | 7

Law enforcement and corrections

Be prepared for any incident Law Enforcement is one of the most dangerous jobs because of unexpected situations and potential hazards. Perpetrators have been known to carry a wide array of hazardous items on their body, including hypodermic needles, blades, knives, and shivs. HexArmor ® tactical gloves and law enforcement gloves are built to handle the unexpected.

Black PMS 389

Black C28 M0 Y100 K0

“Our HexArmor ® gloves give us the confidence to handle pat downs and arrests while limiting risk of hand injuries.”

Jack R. State Trooper State Highway Patrol Division

8 | HexArmor ® Law Enforcement

3 layers SuperFabric ® protection 2 layers SuperFabric ® protection SuperFabric ® protection zone 3 Lay rs SuperFabric ® Protection

SuperFabric ® Protection Zone

4043 PointGuard ® Ultra • SuperFabric ® brand material provides industry-leading needlestick resistance (in noted enhanced areas) • Back-of-hand knuckle padding for incidental bumps/impact • Synthetic leather palm with silicone pattern grip • Neoprene cuff with hook and loop closure Limited sizes available

ANSI/ISEA CUT GRAM SCORE A9 6679

NEEDLESTICK NEWTONS 4X42F

ANSI/ISEA PUNCTURE 3

11.546 3 Layers SuperFabric ® 6.9 2 Layers SuperFabric ®

LEVEL 5 3 Layers SuperFabric ® LEVEL 3 2 Layers SuperFabric ®

ANSI/ISEA ABRASION

SuperFabric ® protection zone

2 layers SuperFabric ® protection

4046

Aramid liner

PointGuard ® Ultra

• SuperFabric ® brand material provides industry-leading needlestick resistance (in noted enhanced areas) • Aramid liner for back-of-hand protection • Premium goatskin leather • Slipfit ® cuff Available in sizes 7/S through 11/XXL

ANSI/ISEA PUNCTURE 3

ANSI/ISEA CUT

4X12F

GRAM SCORE 4064 SuperFabric ® 804 Aramid

NEEDLESTICK LEVEL 2 SuperFabric ® LEVEL 4 2 Layers SuperFabric ®

NEWTONS

5.8 SuperFabric ® 8.42 2 Layers SuperFabric ®

ANSI/ISEA ABRASION

6044 PointGuard ® Ultra

3 layers SuperFabric ® protection

• SuperFabric ® brand material provides industry-leading needlestick resistance (in noted enhanced areas) • Recommended use as an underglove solution with appropriate top-glove combination • Lightweight spandex shell with elastic wrist Available in sizes 5/XXS through 11/XXL

ANSI/ISEA CUT

GRAM SCORE

6408

4X33F

ANSI/ISEA PUNCTURE

NEEDLESTICK LEVEL 4

NEWTONS

4 6

8.6

ANSI/ISEA ABRASION

*SuperFabric ® is a registered trademark of HDM, Inc.

Call 1.877.MY.ARMOR or visit www.hexarmor.com | 9

Gear up with confidence Answer the call of duty with the HexBlue™ line of Law Enforcement defense gloves. Combining high performance with premium comfort, style, and fit, each glove in the series is purpose-built to handle unexpected situations. With options for industry-leading needlestick and cut protection, this extremely durable and dexterous range of protective search gloves feature form-fitting materials, secure fit closures, and touchscreen abilities, keeping you safe and at-the-ready on the job.

10 | HexArmor ® Law Enforcement

2132 CYT HexBlue™ • Back-of-thumb brow cloth • Reinforced index finger and thumb saddle • Synthetic leather palm • Adjustable TPR hook and loop closure for a secure fit • Comfortable, breathable back-of-hand • Touchscreen-compatible • Neutral color scheme for increased concealment Available in sizes 7/S through 11/XXL

2132 STL HexBlue™ • Back-of-thumb brow cloth • Reinforced index finger and thumb saddle • Synthetic leather palm • Adjustable TPR hook and loop closure for a secure fit • Comfortable, breathable back-of-hand • Touchscreen-compatible • Dark color scheme for increased concealment Available in sizes 7/S through 11/XXL

EN388: 2016

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION

ANSI/ISEA PUNCTURE

ANSI/ISEA ABRASION

2121X

2135 HexBlue™

2134 HexBlue™

• SuperFabric ® brand material provides industry-leading needlestick resistance (in noted enhanced areas) • Back-of-hand neoprene material offers wind and liquid resistance • Synthetic leather palm with silicone pattern grip • Reinforced thumb saddle • Adjustable TPR cuff with hook and loop closure • Palm and fingers are touchscreen-compatible Available in sizes 6/XS through 11/XXL

GRAM SCORE

ANSI/ISEA CUT

GRAM SCORE

ANSI/ISEA CUT

PENDING

3464

ANSI/ISEA ABRASION

NEWTONS 5.284

NEEDLESTICK LEVEL 2

6 6

ANSI/ISEA ABRASION

SuperFabric ® Protection Zone ANSI/ISEA ABRASION

3 Layers SuperFabric ® Protection

SuperFabric ® Protection Zone

3 Layers SuperFabric ® Protection

SuperFabric ® protection zone

4041 HexBlue™ PointGuard ® Ultra • SuperFabric ® brand material provides industry-leading needlestick resistance (in noted enhanced areas) • Back-of-hand knuckle padding for incidental bumps/impact • Silicone palm pattern for enhanced grip • Neoprene cuff with hook and loop closure Available in sizes 5/XXS through 11/XXL

4045 HexBlue™ PointGuard ® Ultra • SuperFabric ® brand material provides industry-leading needlestick resistance (in noted enhanced areas) • Back-of-hand knuckle padding for incidental bumps/impact • Silicone palm pattern for enhanced grip • Neoprene cuff with hook and loop closure Available in sizes 6/XS through 12/3XL

ANSI/ISEA CUT GRAM SCORE

A7 4321

4X22F

NEEDLESTICK LEVEL 5 6679

4X42F

ANSI/ISEA PUNCTURE

NEEDLESTICK LEVEL 2 SuperFabric ® LEVEL 3 2 Layers SuperFabric ®

NEWTONS

5.284 SuperFabric ® 6.9 2 Layers SuperFabric ®

11.546

ANSI/ISEA ABRASION SuperFabric ® Protection Zone

ANSI/ISEA ABRASION

3 Layers SuperFabric ® Protection

SuperFabric ® protection zone

2 layers SuperFabric ® protection SuperFabric ® protection zone

3 layers SuperFabric ® protection

Call 1.877.MY.ARMOR or visit www.hexarmor.com | 11

Wearability ® : The key to compliance

HexArmor ® safety eyewear was developed as a natural extension of our core mission: to send every worker home safe, every day. To accomplish this, we knew the safety eyewear we designed and manufactured needed to be a product workers would want to wear – PPE that wouldn’t get in the way – because we all know the safest PPE is the PPE that’s worn. The best way to ensure that eyewear is being worn? Create a product centered on Wearability ® – which is the key to compliance. At HexArmor, ® safety eyewear Wearability ® is comprised of three main factors: Lens technology The part of eyewear that gets little attention (but can have a significant impact) is the lenses. Proprietary LTX ® Lens Technology by HexArmor ® provides uncompromised optical clarity. This, combined with maximum impact resistance, makes our HexArmor lenses top class. Coatings technology Not all lens coatings are the same. Typical dip coatings don’t allow the flexibility of anti-fog and scratch resistance to be applied on different sides of the lens. The flow-coating technique used by HexArmor ® allows this flexibility and outlasts all other eyewear on the market. Fit architecture We take fit very seriously. Properly-fitting eyewear gives wearers confidence. It protects from dust and debris, is free of pressure points, is lightweight, and doesn’t slip. The right eyewear looks and feels good and is easily compatible with other PPE.

Proper protection with no side effects, this is Wearability. ® The result? Compliance.

12 | HexArmor ® Law Enforcement

The most innovative eyewear in safety World-class style and design. Industry-leading technology. In-house processes and manufacturing. This is what sets HexArmor ® safety eyewear apart from the competition. Driven by 90+ years of German expertise from product design to the coating technology and frame manufacturing, you’ll experience a purpose-driven safety product unlike any eyewear on the market – helping workers stay laser-focused on the task at hand, not on their eyewear. Premium components Starting with the manufacturing process, our proprietary dual- and triple-component injection molding technique blends hard and soft components on the sidearms, nose bridge, and brow guard of select models to give wearers the highest durability, comfort, and fit to date. Plus, we have full control over all our unique lens molds, ensuring premium quality at every step. Edge-to-edge Optical Class 1 clarity Proprietary LTX ® Lens Technology with edge-to-edge Optical Class 1 clarity gives wearers as close to natural vision as possible for fewer headaches, eye fatigue, and strain. All lenses are manufactured in-house with 100% visual inspection throughout the production process to ensure that any deviation in optical quality can be immediately corrected.

Dual- and triple-injection molded hard and soft components

Brow guard provides protection from flying particles, dirt, or dust

Flexible and adjustable hinged side arms

Ergonomic designs suited for all-day wear

Soft ear pieces guarantee a stable and low pressure fit

Contoured or adjustable nose bridge allows for a stable, personalized fit

LTX ® lens technology for complete optical clarity

100% UV protection

Call 1.877.MY.ARMOR or visit www.hexarmor.com | 13

Hydrophilic vs. Hydrophobic TruShield ® anti-fog coating technology

Hydrophobic vs. hydrophilic lens performance Our fundamentally different TruShield ® coatings outperform anything on the market due to HexArmor’s chemically engineered anti-fog technology that absorbs moisture droplets as they hit the lens, eliminating fog. This moisture absorbing process is known as hydrophilic and is found in all HexArmor’s anti-fog coatings. What’s more, we apply each coating four times thicker than the competition, making the hydrophilic anti-fog properties even more robust, higher-absorbing, and better performing. This is vastly different than competitive eyewear who use hydrophobic technology to eliminate fog, which causes moisture to spread as it hits the lens. Although effective for a short period, hydrophobic anti-fog coatings are detergent based and wash off over time. This type of short-term fog protection leads to compliance issues and eyewear being treated as disposable. Unmatched cleanability HexArmor's truly permanent anti-fog coatings have proven themselves again and again — staying true to their nature after countless cleanings, leading them to outperform and outlast even the toughest competitors — surpassing the ANSI/ ISEA anti-fog standard for the lifetime of the eyewear. That’s because HexArmor ® uses nanotechnology to bond coatings and create the smoothest surface possible for the best possible cleaning.

With hydrophilic coatings, moisture is absorbed into the coating, eliminating fog.

With hydrophobic coatings, moisture spreads across the lens, eliminating fog.

HexArmor ® TruShield ®

HexArmor ® TruShield ® 2F

3M™ ScotchGuard™ Anti-Fog

Bollé Platinum ®

20 Seconds to fog

Uvex HydroShield™

Initial state

Number of washes*

*One wash is equal to cleaning by thumb with rotary movement and medium pressure under running warm water for five seconds.

14 | HexArmor ® Law Enforcement

Exclusive flow-coating application Profoundly different from the traditional dip-coating methods used by other safety eyewear brands, each TruShield ® coating is applied to the lens one-side-at-a-time with HexArmor’s signature flow-coating technology. Flow-coating allows each side of the lens to be coated with either a permanent anti-fog, a scratch-resistant hard coat, or a combination of both to give wearers specific protection where they need it the most. This specialized dual-coating process is exclusive to HexArmor ® , allowing fog- and scratch-resistance to be amplified individually to extreme levels or combined when needed, delivering safety defense where it’s needed most. By comparison, dip-coating applies the same coating to both sides of the lens and can sacrifice the quality of one protective property over the other.

multipurpose TruShield ®

clean environments & hot-to-cold transitions TruShield ® 2F

Tru

dirt &

TruShield ® 2F Dual-coated lenses are ideal for clean to moderately dirty work environments, where workers transition from cold-to hot or hot-to-cold. Also provides long lasting scratch-resistant properties. permanent anti-fog hard coat scratch and chemical resistance fog moisture absorbs into the coating permanent anti-fog permanent anti-fog cle n environments & hot-to-col tr nsitions ruShield ® 2F

permanent anti-fog w/ scratch resistance dirt & debris, severe interior fogging TruShield ® S permanent anti-fog w/ scratch resistance

TruShield ® multipurpose coating multipurpose TruShield ®

ac perma anti

fog moisture absorbs into the coating

fog m sprea absor the co

hard coat scratch and chemical resistance

dual action permanent anti-fog

permanent anti-fog

w/ scratch resistance

w/ sc atch resistance

multipurpose TruShield ®

polycarbonate lens clean environments & hot-to-cold transitions TruShield ® 2F

dirt & debris, severe interior fogging TruShield ® S

TruS

polycarbonate lens

continu

d act perman anti

TruShield ® S HexArmor ® TruShield ® S dual-coated lenses are ideal for environments where there’s a high degree of dirt or debris, coupled with more severe fogging factors. permanent anti-fog w/ scratch resistance permanent anti-fog w/ scratch resistance fog moisture absorbs into the coating fog moisture absorbs into the coating fog moisture absorbs into the coating fog moisture absorbs into the coating polycarb nate lens

hard coat scratch and chemical resistance

dual action permanent anti-fog fog mois ure spreads then absorbs into the coating

fog moisture absorbs into the coating

permanent anti-fog

polycarbonate lens

fog moisture absorbs into the coating

fog moisture spreads then absorbs into the coating

fog mo spread absorb the co

HexArmor ® TruShield ® is a multipurpose dual-coating that’s suitable for most applications and environments. All HexArmor ® coatings have four unique characteristics: • Permanent, never wash off • Hydrophilic properties • Scratch-resistant • Flow coated permanent anti-fog w/ scratch re istance hard coat scratch and chemical resistance fog moisture absorbs into the coating

multipurpose TruShield ®

polycarbonate lens clean environments & hot-to-cold transitions TruShield ® 2F

dirt & debris, severe interior fogging TruShield ® S

polycarbonate lens continuous interior and exterior fogging TruShield ® 2SF

polycarbonate lens

dual action permanent anti-fog

hard coat scratch and chemical resistance

permanent anti-fog w/ scratch resistance

dual action permanent anti-fog

permanent anti-fog

TruShield ® 2SF HexArmor’s specialized dual-action hydrophilic anti-fog coating is ideal for applications where there is constant fogging.

fog moisture absorbs into the coating

fog moisture spreads then absorbs into the coating

polycarbonate lens

Call 1.877.MY.ARMOR or visit www.hexarmor.com | 15

MX 200 safety eyewear • Rimless lens design with wide field of vision • Dual-injection molded soft-grip side arms • Metal-free hinge design • Beveled lens edge for additional upper eye protection • Integrated channel for eye ventilation • Contoured nose bridge for comfort and fit • LTX ® Lens Technology for complete optical clarity • Compliant with ANSI Z87.1-2020, CE EN166, CSA Z94.3, and High Impact Rated Z87+

Clear

Part Numbers: 11-10001-02 Clear / TruShield ® 11-10002-03 Clear / TruShield ® 2F 11-10003-04 Clear / TruShield ® S 11-10004-05 Clear / TruShield ® 2SF

11-10005-02 Amber / TruShield ® 11-10006-02 Grey 23% / TruShield ® 14-10012 Attachable Foam Guard *TruShield ® 2SF is not CSA Z94.3 certified

Amber

Grey 23%

Also available in a slim design for narrow face shapes (MX200S)

MX 250 safety eyewear • Panoramic lens for wide field of vision • Dual-injection molded low-profile, soft-grip side arms for a slip-free, stable fit • Metal-free hinge design • LTX ® Lens Technology for complete optical clarity • Compliant with ANSI Z87.1-2020, CE EN166, and High Impact Rated Z87+

Clear

Part Numbers: 11-14001-02 Clear / TruShield ® 11-14002-02 Amber / TruShield ® 11-14003-02 Grey 23% / TruShield ® 11-14004-06 Silver Mirror 53% / Anfi-fog inside 11-14005-08 Variomatic / TruShield ® 11-14006-08 Variomatic Dark / TruShield ®

Amber

Grey 23%

Variomatic

Variomatic Dark

Silver Mirror 53%

MX 300 safety eyewear • Modern wraparound style offers wide field of vision

• Dual-injection molded soft-grip side arms • Brow guard provides additional protection from flying particles, dirt, or dust • Metal-free hinge design • Integrated channel for eye ventilation

Clear

• Soft nose piece for comfortable yet durable fit • LTX ® Lens Technology for complete optical clarity • Compliant with ANSI Z87.1-2020, CE EN166, CSA Z94.3, and High Impact Rated Z87+

Part Numbers: 11-13001-02 Clear / TruShield ® 11-13002-02 Amber / TruShield ® 11-13003-02 Grey 23% / TruShield ® 11-13004-02 Grey 14% / TruShield ® 11-13005-02 CBR65 ® / TruShield ® 11-13006-05 Clear / TruShield ® 2SF

Amber

Grey 23%

Grey 14%

CBR65 ®

16 | HexArmor ® Law Enforcement

safety eyewear

VS 250 safety eyewear • Lightweight (23 grams) • Soft, non-slip, adaptive side arms for optimum comfort • Contoured lens delivers a wide field of vision • Extra soft, adjustable nose piece provides a comfortable and customized fit • LTX ® Lens Technology for complete optical clarity • Compliant with ANSI Z87.1-2020, CE EN166, CSA Z94.3, and High Impact Rated Z87+

Clear

Part Numbers: 11-15001-04 Clear / TruShield ® S 11-15002-05 Clear / TruShield ® 2SF* 11-15003-04 Grey 23% / TruShield ® S 11-15004-03 Clear / TruShield ® 2F 11-15005-08 Variomatic / TruShield ®

11-15006-04 CBR65 ® / TruShield ® S 11-15007-05 Grey 14% / TruShield ® 2SF* 11-15008-08 Variomatic Dark / TruShield ® 11-15009-06 Silver Mirror 12% / Anti-fog

Variomatic

Variomatic Dark Grey 23%

Grey 14%

CBR65 ®

Silver Mirror 12%

7 inclination levels

VS 300 safety eyewear • Triple-injected hard and soft components • Soft ear pieces provide a stable and low-pressure fit • Brow guard provides protection from flying particles, dirt, or dust • Flexible side arms with 7 inclination levels • Soft flex nose loops ensure even weight distribution on nose bridge • 100% metal free • 100% UV protection • LTX ® Lens Technology for complete optical clarity • Compliant with ANSI Z87.1-2020, CE EN166, CSA Z94.3*, and High Impact Rated Z87+

Clear

Part Numbers: 11-19001-02 Clear / TruShield ® 11-19002-03 Clear / TruShield ® 2F 11-19003-07 Anti-Reflective / Anti-Reflective 11-19004-08 Variomatic / TruShield ® 11-19010-08 Variomatic Dark / TruShield ®

11-19005-09 Clear Add+1.0* / TruShield ® 11-19009-10 Clear Add+2.0* / TruShield ® 11-19007-02 Grey 23% / TruShield ® *Add+1.0 and Add+2.0 are not CSA Z94.3 certified

Variomatic

Variomatic Dark

Grey 23%

Also available in a slim design for narrow face shapes (VS300S)

Call 1.877.MY.ARMOR or visit www.hexarmor.com | 17

VS 450 safety eyewear • Three inclination side arms that can also extend and retract for maximum adaptability • Extended lens for added protection without restricting peripheral vision • Soft nose piece for added comfort and a non-slip fit • Soft brow guard with sweat channel • LTX ® Lens Technology for complete optical clarity • 100% metal free • 100% UV protection • Compliant with ANSI Z87.1-2020, CE EN166, and High Impact Rated Z87+

Clear

Grey 23%

Part Numbers: 11-26001-02 Clear / TruShield ® 11-26002-02 Grey 23% / TruShield ®

LT 250 OTG safety eyewear • Hinged side arms fold flat for easy storage • Adaptive soft grip side arms for a comfortable, secure fit • Unrestricted peripheral vision with side protection and brow guard • Soft earpieces limit ear pressure • Fits over most prescription glasses • LTX ® Lens Technology for complete optical clarity • Compliant with ANSI Z87.1-2020, CE EN166, CSA Z94.3, and High Impact Rated Z87+

Clear

Part Numbers: 11-18001-02 Clear / TruShield ® 11-18002-02 Grey 23% / TruShield ® 11-18003-08 Variomatic / TruShield ®

Grey 23%

LT 400 safety eyewear • Innovative lens geometry and side arms ensures a close fit for most face shapes • Lightweight (23 grams) • Panoramic lens with integrated side protectors and brow guard • Rimless lens design with wide field of vision • Open rail side arms for functional accessories • LTX ® Lens Technology for complete optical clarity • 100% metal free • 100% UV protection • Compliant with ANSI Z87.1-2020, CE EN166, CSA Z94.3, and High Impact Rated Z87+

Clear

Grey 23%

Part Numbers: 11-22001-02 Clear / TruShield ® 11-22002-02 Grey 23% / TruShield ® 11-22001-02 Clear / TruShield ® 2SF

18 | HexArmor ® Law Enforcement

safety eyewear

LT 450 safety eyewear • Dual-injection molded soft-grip side arms for comfort and non-slip fit • Flexible side arms with adjustable comfort sliders for custom fit • Panoramic lens with integrated side protectors and

brow guard for total coverage and protection • Rimless lens design with wide field of vision • Open rail side arms for functional accessories • LTX ® Lens Technology for complete optical clarity • 100% metal free • 100% UV protection • Compliant with ANSI Z87.1-2020, CE EN166, CSA Z94.3, and High Impact Rated Z87+

Clear

Limited quantities available with adjustable comfort sliders

Part Numbers: 11-24002-02 Grey 23% with sliders/ TruShield ® 11-24003-02 Clear / TruShield ®

Grey 23%

X1 safety eyewear • Dual-injection molded soft-grip side arms for comfort and non-slip fit • Extended lens for added protection without restricting peripheral vision

• Soft nose piece for added comfort and a non-slip fit • LTX ® Lens Technology for complete optical clarity • 100% metal free • 100% UV protection • Compliant with ANSI Z87.1-2020, CE EN166, CSA Z94.3, and High Impact Rated Z87+

Clear

Part Numbers: 11-31001-02 Clear / TruShield ® 11-31002-02 Grey 23% / TruShield ® 11-31003-02 Grey 12% / TruShield ®

Grey 23%

Grey 12%

Call 1.877.MY.ARMOR or visit www.hexarmor.com | 19

The importance of a glove trial

A glove trial is the process of field-testing different models of safety gloves, either from a single source or several manufacturers, in order to identify the best glove for a particular job. When done correctly, the benefits of a glove trial include: • I mproved hand safety program and equipment and reduced rate of hand injuries • I ncreased awareness of hand safety issues among workers • H igher rates of compliance with hand safety PPE requirements • R eduction in costs related to hand protection, through increased efficiency and durability of work gloves, or reduced insurance rates, medical costs, and workers’ comp claims Work conditions vary from one job to another. There is no way to tell how effective a particular safety glove will be without testing it in the field to see how it holds up and protects against the actual hazards encountered in the workplace. Although a glove may have tested well in laboratory settings and been granted a high cut rating, it may lack abrasion resistance and break down quickly in the field. If a glove doesn’t offer the same level of protection at the end of the work day as it does at the beginning, then you need to consider another option. To ensure you avoid wasting time and energy on a poorly-run glove trial, we have outlined a set of proven steps you can take in the glove trial process. These tips and recommendations come from over a decade of experience working with large industrial companies.

For the full white paper, please contact your HexArmor ® rep, or visit https://www.hexarmor.com/trial-request

20 | HexArmor ® Law Enforcement

Glove care - why does it matter? Improper glove care can shorten the life of your PPE

It can also lead to dermatitis, decreased dexterity, loss of protective abilities, and odor. Glove care refers not only to laundering but also proper storage, routine glove checks, and knowledge of materials and their particular strengths and weaknesses. Because there are so many different work gloves on the market, experienced safety managers should be aware of what workers’ gloves are made of and how they will stand up to the applications they’re being used for. Common glove materials include nylon, spandex, leather, cotton, SuperFabric ® *, Kevlar ® , and knit fibers. Each of these materials has a certain way it needs to be cared for. Often there is a blending of the materials, making proper care even more crucial. Proper storage Gloves should be stored in clean, dry conditions, away from direct sunlight and extreme temperatures. Routine glove checks Glove life varies depending on the application, environment, and amount of use. It is vital that you perform routine glove checks before beginning work every day. Take note of areas that have begun to wear down, such as a loose hook and loop closure or a worn-down name tag. If you see holes in the synthetic leather or TP-X ® material on the palm of your glove, this is an indication that its protective qualities may be compromised, putting you at risk of injury. Lingering moisture or a strong odor are also signs that your gloves may need to be replaced. Keeping an eye out for these issues (and others) takes you one step further from a worksite hand injury, which is the ultimate goal of hand protection.

Cleaning + care Most gloves and arm and body PPE are machine washable. Please see hexarmor.com for product specific washing instructions. Increase your glove lifespan Laundering removes harmful chemicals, perspiration, and everyday grit and grime that can weaken protective fibers and seams. Our team of HexArmor ® solutions specialists are here to help you with this process, and they are more than happy to provide you with all the information you need.

*SuperFabric ® is a registered trademark of HDM, Inc.

Call 1.877.MY.ARMOR or visit www.hexarmor.com | 21

LAW ENFORCEMENT

Call 1-877-MY ARMOR or visit hexarmor.com HexArmor ® products are cut and puncture resistant, NOT CUT AND PUNCTURE PROOF. Do not use with moving or serrated blades or tools. User shall be exclusively responsible to assess the suitability of the product as specified for any individual application or use. Protection zones are to be used as a general guide. Actual product protection zones may differ.

Protected by patents and patents pending. SuperFabric ® is a registered trademark of HDM, Inc.

MKHC-0031

All products, product descriptions and performance scores are current as of August 2022 . For current product information, please visit hexarmor.com, or call 1-877-MY ARMOR

Page 2 Page 3 Page 4 Page 5 Page 6 Page 7 Page 8 Page 9 Page 10 Page 11 Page 12 Page 13 Page 14 Page 15 Page 16 Page 17 Page 18 Page 19 Page 20 Page 21 Page 22

Made with FlippingBook Ebook Creator