EoW July 2014

News Corporate

SAMP’s cutting edge Chameleon

By means of this system, the materials flowing from various extruders are all managed by a single device, which conveys them in the right direction depending on the type of cable to be produced. A simple gesture is enough to control the final melt flow directions. the production of perfectly homogeneous cables, since all the insulation materials are obtained by working at the same temperature and the same pressure level. Moreover, the same distributor is used when producing striped and non-striped cables, so that no extra device is needed. Chameleon technology is suitable for all SAMP extrusion heads, including the more sophisticated like the TX6V, which is equipped with the “0-scrap” quick change colour system for the cable stripe, and the TX6V2, where the “0-scrap” system can be applied both to the stripe and the insulation. All parameters can be easily managed via the SAMP Supervision and Control Unit. Chameleon technology allows

In a constant effort to provide cost-effective solutions and innovations to the cable industry, SAMP continuously invests in research and development. The latest and most important innovation is the Chameleon technology, a breakthrough solution for cable type changeover without production stop and speed limitations. Like a chameleon with the ability to change colour fast and frequently, the new solution offers flexibility, efficiency and reliability throughout the extrusion process. Traditionally, when changing a cable type, and going from a striped cable to a non-striped one, the procedure to be followed is rather long and includes a number of steps:

This rough outline describes what takes place in the majority of the cases. SAMP has intentionally avoided to mention any other unconventional, home-made attempt to avoid production stop, since these cannot guarantee product homogeneity and therefore do not meet the market requirements. The process described leads to a production slowdown and delays can even amount to several hours in case of CV lines. In order to maximise efficiency and eliminate non-productive time, SAMP has recently developed Chameleon. ▲ ▲ Chameleon technology allows production of perfectly homogeneous cables

1. Stop the production line 2. Cool down the machinery 3. Open the extrusion head

4. Replace the distributor or ring that creates the stripe on the cable with a similar device allowing the application of a single layer without stripe

5. Reheat the machinery 6. Start the production

SAMP – Italy Website : www.sampsistemi.com

11

www.read-eurowire.com

July 2014