EoW July 2014

Technologynews

Making straightening fast and easy ▲ ▲ The mid-sized automatic straightening and cutting-off machine NR300 from Vitari s

The machine is modular and all the tooling is interchangeable with the smaller capacity models NR100 and NR200. Machine set up times have also been reduced to a minimum of only five to seven minutes. The models are also available in right and left mode allowing for two machines to be set-up face-to-face for greater operator efficiency and a variety of logistic production advantages. The NR300 is easy to use, practical, environmentally safe and a perfect solution for those seeking cost-effective straightening. Vitari SpA – Italy Website : www.vitari.com

iron, solid carbide, ceramic or other materials. The machine has three independent motors which control the wire feed, the straightening spinner and the accurate cutting unit. The high-level electronics allows the operator to program production using the perfectly positioned integrated touch-screen. The operator can proceed to save the setting parameters, production data and then transfer all relevant data to a laptop via USB key. Moreover, the machine can be equipped with a modem for worldwide online technical assistance.

The Vitari NR300 is one of two mid-sized automatic straightening and cutting-off machine models of the new NR series and covers a range of wire diameters from 3mm to 10mm. This compact modular electronic model can process steel drawn wires ranging from mild to high tensile and non-ferrous at high speeds reaching 180m/min (3m/ sec). Wire straightening is executed by processing coil wire through a rotating spinner where specific steel grade dies have been assembled. The surface finish of the wire is strictly related to the choice of steel grade dies which can be in cast

30

www.read-eurowire.com -eurowire.com

July 2014 4

EuroWire – January 2012