Catalog FORMAT plus - EDE 2015 - 2017

213

Thread cutting tools

Through-hole machine tap (nut tap)

Design: HSS-E, DIN 357, tolerance range ISO 2/6H, type N, extra long, the point length is approx. 21-23 threads. Bright surface Application: For regular metric threads according to ISO DIN 13. Especially for thread cutting in hard to access areas. Particularly suitable for general steels, construction steels, machining steels and case-hardening steels.

DIN 357

ISO 2 6H

Type N

M

HSS-E

60°

1 Cutting Tools

≤ 1,5xd

bright

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1750

10

10

1750

Thread

Order No.

Gradient

Total length

Shank ∅

Square shank

Core hole ∅

mm

mm 70 80 90 100 110 125 140 180 200 200 220 250

mm 2.2 2.5 2.8 3.5 4.5 6.0 7.0 9.0 11.0 12.0 14.0 16.0

mm

mm

bright

0030 0035 0040 0050 0060 0080 0100 0120 0140 0160 0180 0200

M3

19.40 22.50 18.55 20.10 20.80 27.00 31.60 41.90 53.80 60.90

0.50 0.60 0.70 0.80 1.00 1.25 1.50 1.75 2.00 2.00 2.50 2.50

2.50 2.90 3.30 4.20 5.00 6.80 8.50 10.20 12.00 14.00 15.50 17.50

M3,5

2.1 2.1 2.7 3.4 4.9 5.5 7.0 9.0 9.0 11.0 12.0

M4 M5 M6 M8

M10 M12 M14 M16 M18 M20

113.00 125.00

(164)

TESA digital inside micrometer IMICRO

• Capa µ System • Protection type IP 54 • Switching mm/inch • Self-centring and self-aligning • High precision ground measuring cone • Spindle pitch: 0.5 mm • Zero setting anywhere • Automatic shutdown • Display blocking • Data output Opto RS 232 • ABS/DIF switching • Reset/Preset (measured value default) • Ratchet coupling

TESA inner micrometer IMICRO is found on Ç 4/41.

1/193

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.

Made with