Catalog FORMAT plus - EDE 2015 - 2017

Milling Cutters 314

Solid Carbide Hi-Helix End Mills

Design: Ultra-fine grit solid carbide, type H, according to company standard, 50°, TiAIN-coated, with centre cut. Application: For slot cutting and for universal machining. Also suitable for trimming and finishing milling. Feed is approx. 50% higher than with a 2-edged cutter. The extremely high spiral lead results in particularly smooth running and thus low deviation in shape and a very good surface on the workpiece. Particularly suitable for machining stainless steel .

VHM UF Solid carbide UF

Typ H

y e

Z 3–4

Factory standard

DIN 6535-HB

INOX

50°

11°

2 Cutting Tools

2365

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2365

107

107

66

66

54

54

2365

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

Number of teeth

d 1

= h10 mm

f z mm

TiAlN

0600 0800 1000 1200 1600 1800 2000 2500

6 8

33.40 42.80 63.40 86.90

13 19 22 25 32 32 38 45

50 60 70 75 90 90

6 8

3 3 3 3 3 3 4 4

0.019 0.025 0.027 0.028 0.031 0.030 0.020 0.022

10 12 16 18 20 25

10 12 16 18 20 25

144.50 211.00 239.00 382.50

100 120

(212)

Hydro-expansion chucks can be found from Ç 3/73.

2/68

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).