Catalog FORMAT plus - EDE 2015 - 2017

319

Milling Cutters

Design: Ultra-fine grit solid carbide, type N, according to company standard, 35°/38°, fire-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Air cooling recommended. Application: Can be used for peripheral milling as well as for universal machining. For milling depths up to 3 x D. Can also be used for trim- ming and finishing milling. Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 35°/38° results in parti- cularly smooth running and thus very good surface on the workpiece. A much longer tool life is achieved than with conventional tools, as well as maximum stability during machining. In addition, feeds higher by up to 60% can be realized. Solid Carbide Long Series Vari-Helix 4 Flute End Mills

VHM UF Solid carbide UF

Typ N

y e

Z 4

Factory standard

DIN 6535-HA

35°/38°

4°

2 Cutting Tools

Fire

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2463

170

170

100

70

200

130

520

6WHHOV XSWR

2463

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

1PP

d 1

= h10 mm

f z mm

Fire

1000 1200 1600 2000 2500

10 12 16 20 25

87.00

40 45 65 65 75

100 150 150 150 150

10 12 16 20 25

0.065 0.079 0.095 0.110 0.165

126.00 238.00 316.00 428.00

(220)

Solid Carbide Vari-Helix 4 Flute End Mills

Design: Ultra-fine grit solid carbide, type N, DIN 6527, 36°/38°, TiAIN-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling as well as for universal machining. Can be used for rough grinding, slot cutting and finishing milling. The irregular spiral lead 36°/38° results in particularly smooth running and thus extremely good workpiece surface quality for finishing milling operations. In addition, feeds higher by up to 60% can be realized for slot cutting and rough milling. A much longer tool life is achieved than with conventional tools.

VHM UF Solid carbide UF

Z 4

DIN 6527

Typ N

y e

DIN 6535-HB

36°/38°

7°

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2407

170

170

100

70

200

520

130

6WHHOV XSWR

2407

dia.

Order No.

Cutting edge length l 2 mm

Overall length l 1 mm

Neck ∅ d 3 mm

Clear area l 3 mm

Shank dia. d 2 = h6 mm

1PP

d 1

= h10 mm

f z mm

TiAlN

0400 0500 0600 0800 1000 1200 1600 2000

4 5 6 8

33.10 33.10 33.10 45.30 68.00 85.40

8 9

54 54 54 58 66 73 82 92

3.7 4.7 5.5 7.5 9.2

18 18 18 22 26 28 34 42

6 6 6 8

0.028 0.028 0.039 0.053 0.065 0.079 0.095 0.110

10 12 14 16 22 26

10 12 16 20

10 12 16 20

11.2 15.0 19.0

149.00 226.50

(221)

2/73

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.