Microsoft Word - Fire Alarm System (Revision 1).docx

DISABLING/ENABLING A DEVICE ON THE FIRE ALARM SYSTEM

Disabling a Device:

1. In the Fire Alarm Device Book, find the device number. Device numbers are the 8-digit numbers listed on the far-left side of the page. 2. Press the COMMAND button and select DISABLE (#3). 3. Press the MENU button and select the device. 4. Press left-hand arrow until you see: (PPCCDDDD). 5. Next, enter the 8-digit number that goes with the device. Hit ENTER. 6. When prompted for the password, enter (2222). Hit ENTER. 7. Panel will beep. Press PANEL SILENCE. 8. Press COMMAND button. 9. Back at the main screen, you will see TROUBLE and the device # 1. Press RESET button and wait for the green light to go out. 2. Press COMMAND button; select ENABLE. 3. Press the MENU button and select the device. 4. Press left-hand arrow until you see: (PPCCDDDD). 5. Next, enter the 8-digit number that goes with the device. Hit ENTER. 6. When prompted for the password, enter (2222). Hit ENTER. 7. Panel will beep. Press PANEL SILENCE. 8. Press COMMAND button. 9. Back at the main screen, you will see NORMAL and the device #.

Enabling a Device:

Revision 2 

Made with FlippingBook HTML5