TPi October 2011

Synchronize to Perfection

The only all-in-one supplier in PVC extrusion.

higher melt pressure after the torpedo and therefore a much • better welding effect by reason of the higher melt pressure after the torpedo, high • melt pressure in the die set is no longer necessary for achie- ving an optimum pipe quality shorter die set • wider pipe diameter range for each pipe head • modular system: use of die set of the nearest smaller pipe head • fast mandrel exchange to adjust wall thickness of end product • 30 - 35 % less volume of head reduces resistance time of mate- • rial resulting in a reduction of stabiliser available for single strand extrusion from 12 to 400 mm and • for double strand extrusion from 12 to 63 mm and 20 - 110 mm respectively RK STREAMLINER

OMNIA XTR Twin-Screw Extruder for PVC and C-PVC Pipe Extrusion 36 D screws for maximum plastification • and output up to 6 % energy saving due to optimized • gear box and screw design torque master four shafts gear box design • for higher torque and long life time vertical reduction gear box for slim machi- • ne frame elliptical barrel contour in metering zone • for effective melt temperature control in air or oil tempering system newest Siemens TEC 4s touch screen • control system with integration of the downstream equipment

HIGH TECH EXTRUSION GMBH GIRAKSTRASSE 2 2100 KORNEUBURG, AUSTRIA PHONE: +43 (0)59 692 2201 FAX: +43 (0)59 692 2202 EMAIL: OFFICE@HT-EXTRUSION.COM

THEYSOHN | TECHNOPLAST | TOPF

WWW.HT-EXTRUSION.COM