2018 Crest Healthcare Catalog

Security &Maintenance

| Smoke, Heat & CO Detectors

YEAR WARRANTY 1

Nurse Call 4 - 84

Photoelectric Smoke Detector for the Hearing Impaired

TVs & Accessories 85 - 104

The Gentex Smoke Detector is a 120 VAC photoelectric single station smoke detector designed to provide reliable early warning of smoke where both audible and visual alarms are required. Operates on the “light scatter” principle, utilizing a pulsing LED light source and a photodiode sensor in a fully screened sensing chamber. Smoke entering the chamber deflects the infrared beam and triggers the alarm. During the alarm period, the strobe will flash at a brightness of 177 candela, 60 times per minute.

Self-Diagnostic Photoelectric Smoke Detector

Fall Management 105 - 118

This unit features a replaceable optical chamber, diagnostic LED, sounder, heat detector, built-in power supervision relay and a design to reduce nuisance alarms caused by dust, RF interference and ambient light. Mounts on single-gang box, 3" round or 4" octagonal boxes. 4-wire, 12 or 24 V.

• 9 VDC battery backup with audible low battery chirp • 5 to 1 signal-to-noise ratio • Nominal 2 1 ⁄ 2 % sensitivity • Convenient test switch • 90 dBA piezo signal

Mobility & Transfer 119 - 152

Part No. 115886

Description

Price

Part No. 115430

Description

Price 82.95

179.95

Self-Diagnostic Photoelectric

Smoke Detector for the hearing impaired

Smoke Detector

153 - 192

Beds & Room Supply

Assistive Devices 193 - 208

115257

YEAR WARRANTY 7

YEAR WARRANTY 3

Clinical Care 209 - 230

First Alert® Carbon Monoxide Alarm The CO Alarm features a digital display that lights up for easy readings. Electrochemical CO sensing allows greater temperature and humidity variations for accurate detection. Peak Level Memory stores and displays the highest CO level detected. Detector will alarm at 70, 150 and 400 PPM, and can be tested using the front test button or remotely using most standard IR remote controls. The unit plugs directly into a standard non-switched outlet, or use the 7' line cord for multiple placement options. Two AA batteries (included) provide battery backup and can be changed without unplugging the monitor.

Combined Smoke/Heat Detector This photoelectric smoke detector with heat sensor is available in a 2-wire or 4-wire unit. Easy to install, with a plug-in design, the large wire entry port and in-line terminals provide ample room for neatly routing wiring inside the base. Base accommodates a variety of back box mounting methods as well as direct mounting with drywall anchors. • Built-in remote maintenance signaling • Drift compensation & smoothing algorithms • Simplified sensitivity measurement • Wide-angle, dual-color LED indication • Loop testing via EZWalk feature

284B

Heat Detector Heat Detector connects easily tomost commercial fire alarm systems. For use in areas where property protection is required such as boiler rooms, kitchens, medicine or linen storage areas. Rate-of- rise models respond to a temperature increase of 15° F/minute, sensing flash fires even before the 135° or 194° fixed temperature is reached. • Rate-of-rise feature is automatically self-restoring • Not for use where life safety is a factor

Carts & Storage 231 - 239

240 - 269

• Low battery warning • Operates at 120 VAC, 60 Hz • Alarms at 85 dB from 10'

Security &Maintenance

Part No. 115257

Description

Price

51.95

Combined Smoke and Heat Detector, 2-wire Combined Smoke and Heat Detector, 4-wire

Part No. Description

Price

Part No. 114485

Description

Price

14.95 14.95

283B 284B

Heat Detector, fixed temp, 135° F Heat Detector, fixed temp, 194° F

Repairs & Services 270 - 272

54.95

Carbon Monoxide Alarm with battery backup

51.95

115258

248

phone: 1-800-328-8908 | fax: 1-800-369-9207 | 2018 | R20