Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro
Hardness test device 848
Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro
Hardness tester Shore-Duometer
Design: With drag indicator, max. mode captures the peak value, point mode shows the stable measured value. Supplied in wooden box. Application: Measuring the Shore penetration depth: plastics, resin, Formica, epoxy, acrylic etc. Recommended especially for internal comparison measurements, where standard calibration, e.g. according to DIN 53505 is not possible.
4941
Measurement range
Order No. 0100
Reading
Hardness
100 HD
145.00 (W498)
1.0 HD
Shore D
Lever test stand for Shore-Duometer
Design: For reproducible hardness testing with base plate of glass. High measurement accuracy due to increased hardness of the base plate. Mechanical design allows precise measurement movements. Levelling device for precise levelling of the base plate. Levelling test bench for inhomogeneous test objects. Application: Suitable for Shore hardness testing of plastics, leather, etc. The SAUTER HB hardness tester is mounted in a hanging position. The test object is placed on the round testing table right under the probe tip. By depressing the lever, the probe tip is pressed in a defined manner into the test object. Note: The accuracy of the measurement result with this test is about 25% higher than for a hand measurement. Supplied without Shore-Duometer.
4941
Length of stroke mm
Order No. 0110
Measuring face ∅ mm
15
310.50 (W498)
75
Equipment
Measuring
4
Leeb hardness test device HMM
Design: Rebound module is jerked by a spring against the test object. The speed reduction is measured and converted into Leeb hardness values. Tests at any angle (360°) due to automatic compensation. Mini statistics function displays the measured value, average value, the difference between maximum and minimum value, date and time. Measuring value display: Rockwell (B & C), Vickers (HV), Brinell (HB), Shore (HSD), Leeb (HL), tensile strength (MPa). Automatic unit conversion, so that measurement result is automatically re-evaluated in all the cited hardness units. Functions: Accuracy: 1 % at 800 HLD (± 6 HLD) Thinnest measurable layer: 8 mm minimum radius of curvature of the test object (concave/convex : 50 mm Scope of delivery: Impact device (type D), infrared printer, hardness reference block, AC adapter and 3 micro batteries AAA/LR03, in plastic case. Note: Replacement battery: (Order No. 9041 0023, Ç 9/12).
4941
Measurement range yield strength
Order No. 1000
Readability (d) HL
Internal data memory
375–2639
1231.00
1
9
(W498)
Accessories for Leeb hardness test device
4941
Design
Order No. 1010
Application
Rebound sensor
507.00
Short sensor for narrow and flat measurement openings
1015 1020
Attachment ring
331.00 119.00 (W498)
For secure positioning
Impact body
–
4941 1010
4941 1020
4941 1015
4/128
Made with FlippingBook Online document