COMHAN Platen en profielen

Sliding end piece system for 40SL window sills 45

To seal the sides of the 40SL window sills in a splash-proof manner, Comhan now also supplies sliding end pieces directly from stock. These special end pieces are equipped with rubber and therefore ensure a good seal. This reduces the risk of water ingress considerably, which makes the use of sealant no longer necessary. The result: the water flows neatly away via the window sill.

Driving rain proof up to 1,950 Pa approved by ift Rosenheim Test standard EN 1027:200-04

Optimal sealing on the fastening side

Expansion compensation up to 3 mm per side

Perfectly fitting on the aluminium window sill 40SL from Comhan

Characteristics:

• Modern design • 22 mm stucco edge

• Easy assembly on the construction site • Mill (untreated) available from stock • Available in RAL colours on request • Expansion compensation up to 3 mm on both sides - prevents cracks in the stucco • Approved by ift Rosenheim – according to the latest test standard with non-ventilated installation – rainproof up to 1,950 Pa

4,5

6

6

Dimension to be deducted = 6 mm per end piece

Window

Waterslagen | Window sills | Fensterbänke

Comhan also supplies from stock: •

Back rubber sealing (165047) to further minimize the risk of water ingress. Self-adhesive anti-vibration material for underneath aluminiumwindow sills to minimise the noise of rain drops (effect of pelting rain). Width sizes: 50, 75, 100 or 150 mm (other sizes on request).

Aluminium sliding end piece

•

Exterior wall insulation

Brickwork

40 mm

The rubber sealing has to be put first onto the window sill, then put the end piece on it