TPT September 2010

In-Line Diameter and Shape Control

For all Types of Pipe, Tube, Profile – Any Shape

STEELMASTER gauges for hot and cold processes Hi-speed laser scanning. Measurement of diameter, ovality, height, width and diagonals.

Possible measuring modes

Standard measuring ranges: 60, 100, 150, 300, 500 mm* (2 . 4, 4, 6, 12, 20 in.) No. of measuring axes: 1...6 Measuring frequency: 1000/s for each axis Typical accuracy:

+/- 0.005 ... +/- 0.1 mm (+/- . 0004 ... . 002 in.)

*Largest product depending on centering

New! Measuring solutions for round and non-round products. Captures also asymmetrical shape deviations of round, oval and polygonal products.

PROFILEMASTER ® gauges for cold processes Advanced vision technology (light-section). For any tube and profile of any shape and material. Full profile contour measurement. Profile and critical dimensions, radii and angles can be programmed (teach-in) and monitored.

Any shape

Standard measuring range: 25, 140, 300 mm* (1, 5 . 5, 12 in.) No. of cameras: 1...6 (standard 4) Measurable parameters:

length, width, height, diameter, radii, angles +/- 0.01 ... 0.05 mm (+/- . 0004 ... . 002 in.)

Typical accuracy:

*Largest product depending on centering

Visit us at:

21-24 Sept. 2010 Shanghai Booth W1 A61

Ask us for additional information: askme@zumbach.ch

Switzerland • Argentina • Benelux • Brazil • China • France • Germany • India • Italy • Spain • Taiwan • UK • USA www. zumbach.com