TPT November 2013

Technology News

Redrawn precision tubes TECNOFAR SpA was founded in 1974 in Delebio, Italy, as family-run company specialising in manufacturing stainless steel and nickel alloy tubes. Experimentation and research, together with the development of new technologies, has made Tecnofar an advanced company in this field. The company has two production units, located in Delebio and Gordona, covering a total surface area of around 10,000m 2 . Tecnofar produces redrawn precision tubes, both in bar and coil form, using the TIG welding process. The company offers a modern, well-equipped department for tube cutting, and is able to produce completely burr-free cut pieces measuring just a few millimetres in length. The company can supply stainless steel tubes ranging from 0.3 to 20mm OD, and from 0.1 to 2mm wall thickness, for precision tubes, while for welded tubes the maximum diameter available is 76mm, with wall thickness up to 3.5mm. Tecnofar uses stainless steels provided and guaranteed by leading steel mills, and offers products in line with the strictest production controls. The company’s quality system achieved international standard ISO 9001:2008, accredited by Italcert, and is structured in such a way as to ensure continuous improvement of products and customer service. The company has also been certified PED (97/23) EC all.1 par. 4.3, for the welding and heat treatment processes of product ranges OD 5-77mm and WT 0.35-2.6mm for austenitic series; and OD 5-77mm and WT 0.56-1.95mm for ferritic series.

Tecnofar SpA – Italy Fax: +39 0342 684500 Email: info@tecnofar.it Website: www.tecnofar.it

Tecnofar can supply high precision tubing just a few millimetres in length

38

www.read-tpt.com

N ovember 2013