TPT November 2013

Technology News

Speed and precision for tube forming transfluid Maschinenbau GmbH,

Spent emulsions SEPAR 5000, installed in the Marcegaglia Industries headquarters in Gazoldo degli Ippoliti, Italy, has a broad versatility. It is claimed to be the largest ultrafiltration plant ever built in Europe for this kind of application, with a normal treatment capacity of 8,000l of spent emulsion and 1,000mc of recirculating emulsion per hour. The unit can treat a broad range of emulsions: mineral oil-based emulsion (eg from rolling mill and tube profiling); synthetic lubricoolant (eg from tube profiling or from skinpass of coils); solvent-based lubricoolant (eg from tube cleaning or from stainless steel skinpass); spent alkaline degreasers; and water and oil mix (coming from pit cleaning).

is the series of forming machines for extreme degrees of tube forming, rapid tool changes and complex geometries – allowed by the supplementary clamping unit. These systems are suitable for an economical mass production process at the highest level. To give already axially formed tubes a further form and to produce an excellent surface and sharp-edged contours for sealing elements, the solution provider transfluid designed rotary and CNC- controlled tube forming machines, which enable an optimised production. Customers can find it in the series SRM in the t form portfolio. transfluid can be visited at FAbTECH Chicago at stand S5684. transfluid Maschinenbau GmbH – Germany Website: www.tube-processing-machines.com

Germany, designs individual solutions for tube processing which guarantee excellent production times and value for money for the customer. transfluid designs advanced tech- nology which copes with the special challenges of tube forming intelligently. Tube endforming machines for the axial use – with supplementary clamps and up to eight stages as well as horizontal and vertical tool change – are available as well as rotary forming machines which can form tubes with the rotation procedure, and roll beading machines (from 4 to 168mm) which can be used in versatile ways to form geometries from outside to inside, from inside to outside and to cut the tube. To reach ideal tube results it is important to complement the tube forming to the tube bending process or to use it as a stand-alone process. REb

Condoroil – Italy Fax: +39 0332 945303 Email: info@condoroil.it Website: www.condoroil.it

74

www.read-tpt.com

N ovember 2013