2018-Ford-Explorer-Owners-Manual-

Transmission

To exit SelectShift mode shift the transmission into another gear (for example, drive [D]). The instrument cluster displays your currently selected gear. If a gear is requested but not available due to vehicle conditions (low speed, too high engine speed for requested gear selection), the current gear flashes three times. Note: At full accelerator pedal travel, the transmission automatically downshifts for maximum performance. UpshiftsWhen Accelerating (Recom- mended for Best Fuel Economy) Shift from: 15 mph (24 km/h) 1 - 2 25 mph (40 km/h) 2 - 3 40 mph (64 km/h) 3 - 4 45 mph (72 km/h) 4 - 5 50 mph (80 km/h) 5 - 6 Brake-Shift Interlock Override WARNINGS When doing this procedure, you need to take the transmission out of park (P) which means your vehicle can roll freely. To avoid unwanted vehicle movement, always fully apply the parking brake prior to doing this procedure. Use wheels chocks if appropriate. If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. Have your vehicle checked as soon as possible.

Use the brake shift interlock lever to move the gearshift lever from the park position in the event of an electrical malfunction or if your vehicle has a dead battery. Apply the parking brake and turn the ignition off before performing this procedure. 1. Insert a screwdriver between shifter boot material and the trim ring to release the retainer tabs from the top panel trim ring. 2. Use the tool to unsnap the shifter bezel from the top finish panel.

Note: Do not press the upper metal lever, damage to vehicle may occur. 3. Locate the lower white lever located on the right side of the shifter. 4. Using the tool, move the lower white lever towards the front of the shifter.

Do not drive your vehicle until you verify that the stoplamps are working.

186

Explorer(TUB)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201707,FirstPrinting