2018-Ford-Explorer-Owners-Manual-

Lighting

DAYTIME RUNNING LAMPS (If Equipped) WARNING The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting during low visibility driving conditions. Make sure you switch the headlamps on, as appropriate, during all low visibility conditions. Failure to do so may result in a crash. Type One - Conventional (Non- Configurable) The daytime running lamps turn on when: 1. Switching the ignition on. 2. The transmission is not in park (P) for vehicleswith automatic transmissions, or releasing the parking brake for vehicles with manual transmissions. 3. The lighting control is in the off, parking lamp or autolamps positions. 4. The headlamps are off. Type Two - Configurable Switch the daytime running lamps on or off using the information display. See Information Displays (page 104). The daytime running lamps turn on when: 1. The lamps are on in the information display. 2. Switching the ignition on. 3. The transmission is not in park (P) for vehicleswith automatic transmissions, or releasing the parking brake for vehicles with manual transmissions. 4. The lighting control is in the autolamps position. 5. The headlamps are off.

Press repeatedly or press and hold until you reach the desired level. HEADLAMP EXIT DELAY Set the delay time to keep the headlamps on for up to three minutes after switching off the ignition. Follow the steps below to change the delay time: Note: Complete steps 1 through 6within 10 seconds. 1. Switch the ignition off. 2. Select the autolamp position on the lighting control. 3. Switch the lighting control to the off position. 6. Select the autolamp position on the lighting control. The headlamps and parking lamps turn on. 7. Switch the lighting control to the off position when reaching the required delay time. Theheadlamps andparking lamps turn off. Set the headlamp exit delay to one of the following settings: • Off. • 10 seconds. • 20 seconds. • 120 seconds. Note: Adjust the time delay using the display controls in the information display. See Information Displays (page 104). 4. Switch the ignition on. 5. Switch the ignition off.

85

Explorer(TUB)Canada/UnitedStatesofAmerica,enUSA,Editiondate:201707,FirstPrinting